What is a Chain track quenching heat treatment furnace? Introduction to the advantages and characteristics of the Forging furnace

Chain track quenching heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is an advanced Chain track quenching heat treatment furnace developed by our company in combination with the actual situation of the industry。The following is to introduce the Chain track quenching heat treatment furnace:

1、Brief introduction of Chain track quenching heat treatment furnace

Chain track quenching heat treatment furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，The structural design is more advanced and reasonable.，it mainly includes combustor, ventilation system, furnace chamber, convection chamber and ventilation system，the product looks beautiful.，has been favored by more and more customers.。

Chain track quenching heat treatment furnace

2、Chain track quenching heat treatment furnace function

Chain track quenching heat treatment furnaceit has the functions of normalizing, quench, Forging heating, hardening and tempering and normalizing，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it is widely used in chemical industry, material, Household necessities, shipping, heat treatment and other industries，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，It has the functions of Metal forging heating, Improve production efficiency, Improve production efficiency, Metal melting and casting and Energy conservation and environmental protection。

Chain track quenching heat treatment furnace

3、Chain track quenching heat treatment furnace advantage

The advantages of Chain track quenching heat treatment furnace are as follows:

1. Wide application range

The Chain track quenching heat treatment furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. easy to operate

The operation interface of the Chain track quenching heat treatment furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Rapid temperature rise

The Chain track quenching heat treatment furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Intelligent control

The Chain track quenching heat treatment furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Chain track quenching heat treatment furnace

4、Advantages of Chain track quenching heat treatment furnace principle

Chain track quenching heat treatment furnacethe principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the product looks atmospheric.。

Chain track quenching heat treatment furnace

5、Chain track quenching heat treatment furnace price consultation

The Chain track quenching heat treatment furnace price is introduced as follows:

1. product configuration

The difference in Chain track quenching heat treatment furnace configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Chain track quenching heat treatment furnace price and service can meet the actual needs of customers.

4. manufacturing cost

Production costs include raw material costs, labor costs, other costs, etc., which manufacturers need to invest when producing products, but these factors are not certain. They are affected by the market. When one factor in the market changes, the production costs of manufacturers will also change, and the price of Chain track quenching heat treatment furnace will also fluctuate to some extent.

5. Different regions

If the location of the manufacturer is superior, its transportation will be more convenient. One-combustion energy saving address:Jinan has convenient transportation, which provides a good convenience for the transportation of Chain track quenching heat treatment furnace.

Chain track quenching heat treatment furnace

6、Brief introduction of One-combustion energy saving

One-combustion energy saving is a professional and large-scale Chain track quenching heat treatment furnace manufacturer, which has many years of production and operation, complete production facilities, skilled staff and high production capacity and product quality. It is a Chain track quenching heat treatment furnace manufacturer trusted by consumers at present.。

One-combustion energy saving

Chain track quenching heat treatment furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，widely used inelectron,pharmacy,building materials,machinery,pharmacy and other industries，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.。