What is a Regenerative natural gas walking furnace? Introduction to the advantages and characteristics of heating furnace functions

Regenerative natural gas walking furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the product looks beautiful.，widely used inaerospace,Household necessities,heat treatment,pharmacy,shipping and other industries，Cheap and high quality。The following is to introduce the Regenerative natural gas walking furnace:

1、Brief introduction of Regenerative natural gas walking furnace

Regenerative natural gas walking furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，has been favored by more and more customers.。

Regenerative natural gas walking furnace

2、Regenerative natural gas walking furnace use

The purpose of Regenerative natural gas walking furnace is introduced as follows:

1. Metal forging heating

The Regenerative natural gas walking furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal heat treatment

In addition to forging heating, Regenerative natural gas walking furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Energy conservation and environmental protection

The Regenerative natural gas walking furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Improve production efficiency

The Regenerative natural gas walking furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Regenerative natural gas walking furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Regenerative natural gas walking furnace

3、Regenerative natural gas walking furnace characteristics

The Regenerative natural gas walking furnace features are as follows:

1. Efficient heating

The Regenerative natural gas walking furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Stable and reliable

The Regenerative natural gas walking furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Strong adaptability

The Regenerative natural gas walking furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Strong adaptability

The Regenerative natural gas walking furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Regenerative natural gas walking furnace

4、Regenerative natural gas walking furnace principle

Regenerative natural gas walking furnacethe principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，Commonly used inMetal melting and casting,Energy conservation and environmental protection,Improve production efficiency,Metal forging heating,Metal tempering and so on，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，The overall structural design is relatively simple，structure mainly includes: recovery of waste heat, convection chamber, furnace chamber, convection chamber, recovery of waste heat and so on。

Regenerative natural gas walking furnace

5、Regenerative natural gas walking furnace video

Speak directly with facts on the spot。

Regenerative natural gas walking furnace

As you can see from the live video.，One-combustion energy saving at the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。

6、Regenerative natural gas walking furnace price advantage

The Regenerative natural gas walking furnace price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. product model

Because of the different specifications of products, its price will be different, so its selling price is closely related to the model specifications, but the overall selling price of One-combustion energy saving is reasonable among similar products.

3. regional difference

One-combustion energy saving has a geographical advantage, where the transportation is developed, the product transportation cost is low, and the price and consumption level are also low, which provides a good sales environment for Regenerative natural gas walking furnace.

4. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

5. Product technology

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

Regenerative natural gas walking furnace

Regenerative natural gas walking furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。