Introduction to Regenerative walking back and forth furnace, introduction to heating furnace function advantages and characteristics

Regenerative walking back and forth furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，it is mainly composed of ventilation system, ventilation system, convection chamber, ventilation system and recovery of waste heat，features include Stable and reliable, Easy to control, Strong adaptability, energy-efficient and energy saving and environmental protection，is a Regenerative walking back and forth furnace。

1、Brief introduction of Regenerative walking back and forth furnace

Regenerative walking back and forth furnaceIt is a forging heating device using gas as fuel.，at the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，support customization。

Regenerative walking back and forth furnace

2、Structural advantages of Regenerative walking back and forth furnace

The Regenerative walking back and forth furnace has the following structure

1. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. Radiation chamber

The heat load of the main place for Regenerative walking back and forth furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. furnace chamber

A space for holding metallic materials for heating.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Regenerative walking back and forth furnace

3、Regenerative walking back and forth furnace HD real shot

Speak directly with facts on the spot。

Regenerative walking back and forth furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd is a kind of high quality and low price Regenerative walking back and forth furnace。

4、Introduction of Regenerative walking back and forth furnace characteristics

Regenerative walking back and forth furnace has the following characteristics

1. Easy to maintain

The structural design of the Regenerative walking back and forth furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. Stable and reliable

The Regenerative walking back and forth furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Regenerative walking back and forth furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

5. Efficient heating

The Regenerative walking back and forth furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Regenerative walking back and forth furnace

5、Regenerative walking back and forth furnace function

Regenerative walking back and forth furnaceit has the functions of quench, heat treatment, Casting heating, quench and normalizing，widely used in petroleum, metallurgy, surface treatment, Machinery manufacturing, chemical industry and other fields，the product looks beautiful.，Simple structure and advanced technology.，the main structure includes furnace chamber, Radiation chamber, combustor, ventilation system, ventilation system and so on，Mainly used forEnergy conservation and environmental protection,Metal melting and casting,Metal heat treatment,Improve production efficiency andMetal tempering。

Regenerative walking back and forth furnace

Regenerative walking back and forth furnacemultifunctional, with functions such as temper, anneal, Forging heating, hardening and tempering and heat treatment，the product looks atmospheric.，the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.。