Introduction to Fully automatic deep well furnace and forging furnace working principle

Fully automatic deep well furnaceIt is a forging heating device using gas as fuel.，The structure is novel, special, advanced, reasonable and scientific.，it mainly includes furnace chamber, ventilation system, combustor, convection chamber and recovery of waste heat。The following is to introduce the Fully automatic deep well furnace:

1、Brief introduction of Fully automatic deep well furnace

Fully automatic deep well furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，it has the functions of Casting heating, anneal, temper, heat treatment and normalizing，it is mainly composed of ventilation system, combustor, Radiation chamber, recovery of waste heat and convection chamber，This Fully automatic deep well furnaceSimple structure and reliable operation.，the product looks beautiful.。

Fully automatic deep well furnace

2、Fully automatic deep well furnace performance advantage

The advantages of Fully automatic deep well furnace are as follows:

1. easy to operate

The operation interface of the Fully automatic deep well furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Intelligent control

The Fully automatic deep well furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Rapid temperature rise

The Fully automatic deep well furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Wide application range

The Fully automatic deep well furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Intelligent control

The Fully automatic deep well furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

Fully automatic deep well furnace

3、Fully automatic deep well furnace function

Fully automatic deep well furnacemultifunctional, with functions such as Forging heating, hardening and tempering, quench, Casting heating and hardening and tempering，It has a wide range of uses, and is often used inMetal tempering,Metal melting and casting,Improve production efficiency,Metal forging heating,Metal heat treatment and so on，Mainly used forMetal tempering,Metal melting and casting,Energy conservation and environmental protection,Improve production efficiency andMetal forging heating，is designed by One-combustion energy saving with advanced technology。

Fully automatic deep well furnace

4、Fully automatic deep well furnace application

Fully automatic deep well furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Fully automatic deep well furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Energy conservation and environmental protection

The Fully automatic deep well furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal forging heating

The Fully automatic deep well furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal tempering

By properly heating and cooling the metal material, the Fully automatic deep well furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Improve production efficiency

The Fully automatic deep well furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Fully automatic deep well furnace

5、Fully automatic deep well furnace price consultation

The Fully automatic deep well furnace price is introduced as follows:

1. Overall configuration

The difference in Fully automatic deep well furnace configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. Different regions

One-combustion energy savingJinan, the transportation is convenient, and the corresponding cost of transporting Fully automatic deep well furnace is low, which reduces the cost of selling Fully automatic deep well furnace by manufacturers, and the price will also decrease.

4. Company size

Our factory is a direct selling manufacturer of Fully automatic deep well furnace, with independent production and processing facilities, few circulation links and low circulation cost.

5. technology content

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

Fully automatic deep well furnace

6、One-combustion energy saving workshop real shot

You can buy Fully automatic deep well furnace according to your needs and show you product videos.。

Fully automatic deep well furnace

As you can see from the live video.One-combustion energy saving the product looks atmospheric.。

Fully automatic deep well furnaceCommonly used inMetal melting and casting,Improve production efficiency,Metal heat treatment,Metal heat treatment,Energy conservation and environmental protection and so on，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，the main features are Strong adaptability, Easy to maintain, energy-efficient, Strong adaptability and Easy to maintain。