What is a Rotating step advancing and retreating furnace? Forging furnace specifications, models, and parameters

Rotating step advancing and retreating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a common Rotating step advancing and retreating furnace。The following is to introduce the Rotating step advancing and retreating furnace:

1、Brief introduction of Rotating step advancing and retreating furnace

Rotating step advancing and retreating furnaceIt is a forging heating device using gas as fuel.，the product looks atmospheric.，multifunctional, with functions such as hardening and tempering, heat treatment, anneal, Forging heating and temper。

Rotating step advancing and retreating furnace

2、Rotating step advancing and retreating furnace use

The purpose of Rotating step advancing and retreating furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Rotating step advancing and retreating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Improve production efficiency

The Rotating step advancing and retreating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Energy conservation and environmental protection

The Rotating step advancing and retreating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Rotating step advancing and retreating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal tempering

By properly heating and cooling the metal material, the Rotating step advancing and retreating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Rotating step advancing and retreating furnace

3、Introduction of Rotating step advancing and retreating furnace characteristics

Rotating step advancing and retreating furnace has the following characteristics

1. Strong adaptability

The Rotating step advancing and retreating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. Efficient heating

The Rotating step advancing and retreating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. Easy to maintain

The structural design of the Rotating step advancing and retreating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Stable and reliable

The Rotating step advancing and retreating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Stable and reliable

The Rotating step advancing and retreating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Rotating step advancing and retreating furnace

4、Rotating step advancing and retreating furnace structure composition

The Rotating step advancing and retreating furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. furnace chamber

A space for holding metallic materials for heating.

5. Radiation chamber

The heat load of the main place for Rotating step advancing and retreating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Rotating step advancing and retreating furnace

5、Rotating step advancing and retreating furnace customer scene picture

Rotating step advancing and retreating furnace have various specifications and models, which can meet the diverse needs of users. The following are high-definition real pictures, which are exquisite in workmanship and trustworthy.。

Rotating step advancing and retreating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Rotating step advancing and retreating furnace application

Rotating step advancing and retreating furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Rotating step advancing and retreating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal forging heating

The Rotating step advancing and retreating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Improve production efficiency

The Rotating step advancing and retreating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Energy conservation and environmental protection

The Rotating step advancing and retreating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Rotating step advancing and retreating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Rotating step advancing and retreating furnace

Rotating step advancing and retreating furnaceIt is a product series that integrates Metal forging heating, Metal tempering, Improve production efficiency, Metal forging heating and Metal heat treatment，widely used inshipping,chemical industry,heat treatment,war industry,automobile and other industries，the product looks atmospheric.。