What is a Stepped bottom continuous heat treatment furnace? heating furnace specifications, models, and parameters

Stepped bottom continuous heat treatment furnaceIt is a forging heating device using gas as fuel.。The following is to introduce the Stepped bottom continuous heat treatment furnace:

1、Brief introduction of Stepped bottom continuous heat treatment furnace

Stepped bottom continuous heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，is designed by One-combustion energy saving with advanced technology。

Stepped bottom continuous heat treatment furnace

2、Video analysis of Stepped bottom continuous heat treatment furnace

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Stepped bottom continuous heat treatment furnacet operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Stepped bottom continuous heat treatment furnace

As you can see from the live video.，One-combustion energy saving at work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。

3、Stepped bottom continuous heat treatment furnace HD picture real shot

Excellent materials, atmospheric design, fine workmanship, impeccable, trustworthy, all-round high-definition shooting, which is helpful for customers' reference.。

Stepped bottom continuous heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Stepped bottom continuous heat treatment furnace function

Stepped bottom continuous heat treatment furnacemultifunctional, with functions such as heat treatment, hardening and tempering, Forging heating, normalizing and temper，Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，the main structure includes furnace chamber, Radiation chamber, furnace chamber, convection chamber, recovery of waste heat and so on，support customization。

Stepped bottom continuous heat treatment furnace

5、Structural advantages of Stepped bottom continuous heat treatment furnace

The Stepped bottom continuous heat treatment furnace has the following structure

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. Radiation chamber

The heat load of the main place for Stepped bottom continuous heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Stepped bottom continuous heat treatment furnace

6、Stepped bottom continuous heat treatment furnace price advantage

The Stepped bottom continuous heat treatment furnace price is introduced as follows:

1. product model

There are many specifications and models of Stepped bottom continuous heat treatment furnace in the market now. Under normal circumstances, the price of large-sized Stepped bottom continuous heat treatment furnace is definitely higher than that of small-sized Stepped bottom continuous heat treatment furnace.

2. company strength

Reliable manufacturers can produce excellent products, and such manufacturers have high comprehensive credibility and can design products in all directions. Therefore, compared with other manufacturers, such products have higher scientific and technological content and more functions. One-combustion energy saving's reputation and products are very high, and it is a trustworthy big brand and manufacturer.

3. Sales model

Manufacturers mainly implement the sales mode of small profits but quick turnover and online direct sales. The prices of products are generally low, and the prices are clearly marked, and they will not be more expensive at will. In addition, manufacturers mainly establish communication and negotiation relations with customers through the Internet and telephone, which can greatly reduce the investment in facade expenses, and the production cost of manufacturers is low, so the price of Stepped bottom continuous heat treatment furnace is low.

4. Company size

Although there are many manufacturers of products in Jinan, there are certain differences in the scale and strength of each manufacturer. Some manufacturers are large in scale and strength, some are small in scale, and some manufacturers do not have their own production workshops and belong to middlemen. Relatively speaking, the prices of products formulated by middlemen are higher.

5. market supply and demand

Market supply and demand is the inevitable law of market development, with more market supply, less demand and lower product prices; The market supply is small, and people's demand is large. "Things are scarce and expensive", the product price will increase accordingly, and the price of One-combustion energy saving Stepped bottom continuous heat treatment furnace will also conform to this market law.

Stepped bottom continuous heat treatment furnace

Stepped bottom continuous heat treatment furnaceit can be used in surface treatment, chemical industry, war industry, Machinery manufacturing, automobile and other industries，It is mostly used in Metal tempering, Metal forging heating, Energy conservation and environmental protection, Improve production efficiency, Metal heat treatment, Metal melting and casting and so on，structure mainly includes: combustor, recovery of waste heat, ventilation system, convection chamber, ventilation system and so on，productThe structure is novel, special, advanced, reasonable and scientific.。