Introduction to Regenerative burner trolley heating furnace and Forging furnace structure principle

Regenerative burner trolley heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a Regenerative burner trolley heating furnace newly developed by One-combustion energy saving。

1、Brief introduction of Regenerative burner trolley heating furnace

Regenerative burner trolley heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，It has a wide range of uses, including Metal forging heating, Metal heat treatment, Energy conservation and environmental protection, Metal tempering and Metal melting and casting，is based on One-combustion energy saving is carefully developed by One-combustion energy saving combined with advanced technology。

Regenerative burner trolley heating furnace

2、Regenerative burner trolley heating furnace video live broadcast

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Regenerative burner trolley heating furnace production process and production site, and gain favorable comments and recognition from customers.。

Regenerative burner trolley heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd is a kind of high quality and low price Regenerative burner trolley heating furnace。

3、Working principle of Regenerative burner trolley heating furnace

Regenerative burner trolley heating furnacethe principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，It is an efficient, energy-saving and environment-friendly metal heating device.，it has the functions of quench, Forging heating, Casting heating, anneal and temper，It can be used for Improve production efficiency, Metal melting and casting, Improve production efficiency, Metal tempering, Metal heat treatment, Energy conservation and environmental protection and so on，the product looks beautiful.。

Regenerative burner trolley heating furnace

4、Regenerative burner trolley heating furnace structure composition

The Regenerative burner trolley heating furnace has the following structure

1. Radiation chamber

The heat load of the main place for Regenerative burner trolley heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. furnace chamber

A space for holding metallic materials for heating.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

Regenerative burner trolley heating furnace

5、Regenerative burner trolley heating furnace function

Regenerative burner trolley heating furnacemultifunctional, with functions such as heat treatment, normalizing, Forging heating, hardening and tempering and quench，Simple structure and advanced technology.，the main structure includes furnace chamber, convection chamber, recovery of waste heat, furnace chamber and ventilation system，the product looks atmospheric.，is a kind of high quality and low price Regenerative burner trolley heating furnace，it is an ideal choice for customers to buy Regenerative burner trolley heating furnace。

Regenerative burner trolley heating furnace

Regenerative burner trolley heating furnaceat the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，It is a product series that integrates Improve production efficiency, Metal forging heating, Metal tempering, Energy conservation and environmental protection and Metal heat treatment。