Introduction to Regenerative trolley forging heating furnace, introduction to forging furnace advantages and characteristics

Regenerative trolley forging heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it has the structure of ventilation system, furnace chamber, convection chamber, combustor and ventilation system，This productThe overall structural design is simple and novel.，the product looks beautiful.，reliable quality。The following is to introduce the Regenerative trolley forging heating furnace:

1、Brief introduction of Regenerative trolley forging heating furnace

Regenerative trolley forging heating furnaceIt is a forging heating device using gas as fuel.，features include Easy to control, Stable and reliable, energy saving and environmental protection, Strong adaptability and Easy to maintain，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，Widely used inImprove production efficiency,Metal melting and casting,Metal tempering,Metal heat treatment,Metal forging heating and so on，it has the functions of temper, anneal, Forging heating, temper and Forging heating。

Regenerative trolley forging heating furnace

2、Advantages of Regenerative trolley forging heating furnace principle

Regenerative trolley forging heating furnaceat work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the product looks atmospheric.，The structure is novel, special, advanced, reasonable and scientific.，it is usually composed of recovery of waste heat, Radiation chamber, Radiation chamber, convection chamber and furnace chamber。

Regenerative trolley forging heating furnace

3、Functional advantages of Regenerative trolley forging heating furnace

Regenerative trolley forging heating furnaces have the following advantages.

1. Efficient combustion

The Regenerative trolley forging heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. Improve product quality

Because the Regenerative trolley forging heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Regenerative trolley forging heating furnace can significantly reduce energy consumption, thus reducing operating costs.

4. easy to operate

The operation interface of the Regenerative trolley forging heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Wide application range

The Regenerative trolley forging heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Regenerative trolley forging heating furnace

4、Regenerative trolley forging heating furnace HD picture

Regenerative trolley forging heating furnace styles and designs are diverse, specifications and models can be customized according to customer needs, providing high-definition pictures for new and old customers' reference.。

Regenerative trolley forging heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Regenerative trolley forging heating furnace use

The purpose of Regenerative trolley forging heating furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Regenerative trolley forging heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal forging heating

The Regenerative trolley forging heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative trolley forging heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Energy conservation and environmental protection

The Regenerative trolley forging heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal tempering

By properly heating and cooling the metal material, the Regenerative trolley forging heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Regenerative trolley forging heating furnace

6、Regenerative trolley forging heating furnace price

The Regenerative trolley forging heating furnace price is introduced as follows:

1. product model

Customer needs are different, so the required product models will be different. Different product models and different performances will naturally lead to different Regenerative trolley forging heating furnace prices.

2. quality factor

If the quality of the product is guaranteed, its service life will be longer. At the same time, the more perfect the performance, the more economic value can be created for customers, and the price of such products will be higher. One-combustion energy saving has strictly controlled the quality and the sales price is also reasonable.

3. Product technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

4. regional difference

If the location of the manufacturer is superior, its transportation will be more convenient. One-combustion energy saving the site is located at:Jinan has convenient transportation, which provides a good convenience for the transportation of Regenerative trolley forging heating furnace.

5. Brand strength

At present, there are various brands of Regenerative trolley forging heating furnace in Jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Regenerative trolley forging heating furnace are different.

Regenerative trolley forging heating furnace

Regenerative trolley forging heating furnaceis a Regenerative trolley forging heating furnace，the product looks atmospheric.，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.。