Introduction to High temperature push-pull trolley heating furnace, how much is the price of the heating furnace?

High temperature push-pull trolley heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a popular High temperature push-pull trolley heating furnace。

1、Brief introduction of High temperature push-pull trolley heating furnace

High temperature push-pull trolley heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，is a High temperature push-pull trolley heating furnace newly developed by One-combustion energy saving。

High temperature push-pull trolley heating furnace

2、High temperature push-pull trolley heating furnace structure composition

The High temperature push-pull trolley heating furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Radiation chamber

The heat load of the main place for High temperature push-pull trolley heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. furnace chamber

A space for holding metallic materials for heating.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

High temperature push-pull trolley heating furnace

3、High temperature push-pull trolley heating furnace use

The purpose of High temperature push-pull trolley heating furnace is introduced as follows:

1. Energy conservation and environmental protection

The High temperature push-pull trolley heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of High temperature push-pull trolley heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal forging heating

The High temperature push-pull trolley heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Improve production efficiency

The High temperature push-pull trolley heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Energy conservation and environmental protection

The High temperature push-pull trolley heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

High temperature push-pull trolley heating furnace

4、High temperature push-pull trolley heating furnace characteristics

The High temperature push-pull trolley heating furnace features are as follows:

1. Stable and reliable

The High temperature push-pull trolley heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Efficient heating

The High temperature push-pull trolley heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Stable and reliable

The High temperature push-pull trolley heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

High temperature push-pull trolley heating furnace

5、High temperature push-pull trolley heating furnace explanation video

Speak directly with facts on the spot。

High temperature push-pull trolley heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd it can be used in petroleum, Machinery manufacturing, aerospace, light industry, heat treatment and other industries。

High temperature push-pull trolley heating furnaceThe structural design is simple, novel and special.，structure mainly includes: ventilation system, combustor, furnace chamber, recovery of waste heat, ventilation system and so on，Widely used inMetal melting and casting,Metal heat treatment,Improve production efficiency,Energy conservation and environmental protection,Metal melting and casting and so on。