Introduction to Low temperature catalytic flue gas denitrification equipment, SCR denitration system specifications, model parameters

Low temperature catalytic flue gas denitrification equipmentit refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.，it has the structure of Temperature control and monitoring system, Catalyst reactor, Flue gas mixing and distribution system, control system and Catalyst supply system，at the start of the operation,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，has been favored by more and more customers.。The following is to introduce the Low temperature catalytic flue gas denitrification equipment:

1、Brief introduction of Low temperature catalytic flue gas denitrification equipment

Low temperature catalytic flue gas denitrification equipmentthe full name is selective catalytic reduction technology, which is an advanced flue gas denitrification technology.，It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Low temperature catalytic flue gas denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Low temperature catalytic flue gas denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Low temperature catalytic flue gas denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Low temperature catalytic flue gas denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Low temperature catalytic flue gas denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、Technology has been developed and applied for many years, and it is mature and stable. The Low temperature catalytic flue gas denitrification equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Low temperature catalytic flue gas denitrification equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.，the main features are Stable operation, Mature and stable technology, Economically feasible, Environment friendly and Environmental protection and pollution-free，it is an ideal choice for customers to buy Low temperature catalytic flue gas denitrification equipment。

Low temperature catalytic flue gas denitrification equipment

2、Introduction of advantages of Low temperature catalytic flue gas denitrification equipment

The advantages of Low temperature catalytic flue gas denitrification equipment are as follows:

1. Environmental friendliness

The by-products produced by Low temperature catalytic flue gas denitrification equipment technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Low temperature catalytic flue gas denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

2. Diversity and high efficiency of catalysts

There are many kinds of catalysts used in the Low temperature catalytic flue gas denitrification equipment technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at low temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Low temperature catalytic flue gas denitrification equipment technology to maintain high efficiency of denitration in a wider temperature range and more complex flue gas conditions.

3. economic viability

The initial investment of this technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Low temperature catalytic flue gas denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Low temperature catalytic flue gas denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.

4. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the Low temperature catalytic flue gas denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

5. Wide applicability

Low temperature catalytic flue gas denitrification equipment technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Low temperature catalytic flue gas denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.

Low temperature catalytic flue gas denitrification equipment

3、Low temperature catalytic flue gas denitrification equipment function

Low temperature catalytic flue gas denitrification equipmentit has the functions of Promote sustainable development, environmental protection, Improve energy efficiency, Promote sustainable development and Improve working conditions，features include Efficient denitration, Mature technology, High denitration efficiency, High denitration efficiency and Good selectivity，Structure consists of Catalyst supply system, Flue gas mixing and distribution system, control system, Temperature control and monitoring system, Catalyst reactor and so on，This Low temperature catalytic flue gas denitrification equipmentThe structural design is simple, novel and special.，the product looks atmospheric.，it has been widely used in coal-fired power station, iron and steel plant, Gas power plant, cement plant, coal-fired power station and other industries。

Low temperature catalytic flue gas denitrification equipment

4、Low temperature catalytic flue gas denitrification equipment use

Low temperature catalytic flue gas denitrification equipmentIt is a product series that integrates Meet the requirements of environmental protection, Improve product quality, Meet the requirements of environmental protection, Promote sustainable development and environmental protection。

Low temperature catalytic flue gas denitrification equipment

5、Low temperature catalytic flue gas denitrification equipment price

The Low temperature catalytic flue gas denitrification equipment price is introduced as follows:

1. Company size

Our factory is a direct selling manufacturer of Low temperature catalytic flue gas denitrification equipment, with independent production and processing facilities, few circulation links and low circulation cost.

2. raw material

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

3. Sales model

One-combustion energy saving has long used the sales method of small profits but quick turnover to sell products, and the product price, market price and ex-factory price are the same. The purpose of this is to improve the sales volume of products and the visibility of enterprises.

4. manufacturing cost

If the cost of the product is high, the selling price of the product will be high, so the cost input is an important factor that causes the price change of the Low temperature catalytic flue gas denitrification equipment.

5. quality factor

The higher the quality of the product, the longer its service life will be, and such products can create more amazing economic value for customers as much as possible. At the same time, customers are quite fond of such products, and One-combustion energy saving's product quality is guaranteed and the price is cost-effective.

Low temperature catalytic flue gas denitrification equipment

6、One-combustion energy saving workshop real shot

Speak directly with facts on the spot。

Low temperature catalytic flue gas denitrification equipment

As you can see from the live video.One-combustion energy saving at work,Under the action of catalyst, reducing agents (such as ammonia, urea, etc.) react with nitrogen oxides in flue gas to convert them into harmless nitrogen and water vapor.。

Low temperature catalytic flue gas denitrification equipmentThe overall structural design is simple and novel.，it is mainly composed of Temperature control and monitoring system, Catalyst reactor, control system, Flue gas mixing and distribution system and Catalyst supply system，Widely used in Improve product quality, Flue gas denitrification, environmental protection, Improve product quality and Meet the requirements of environmental protection。