What is a Automatic temperature control through furnace? How much is the price of the Forging furnace?

Automatic temperature control through furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it has the functions of anneal, Forging heating, normalizing, heat treatment and anneal。The following is to introduce the Automatic temperature control through furnace:

1、Brief introduction of Automatic temperature control through furnace

Automatic temperature control through furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，multifunctional, with functions such as Forging heating, quench, temper, Casting heating and normalizing，at work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，usually used in automobile, chemical industry, Household necessities, material, building materials and other fields。

Automatic temperature control through furnace

2、Introduction of Automatic temperature control through furnace characteristics

Automatic temperature control through furnace has the following characteristics

1. Efficient heating

The Automatic temperature control through furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Easy to maintain

The structural design of the Automatic temperature control through furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Automatic temperature control through furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Stable and reliable

The Automatic temperature control through furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to maintain

The structural design of the Automatic temperature control through furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Automatic temperature control through furnace

3、Introduction of advantages of Automatic temperature control through furnace

Automatic temperature control through furnaces have the following advantages.

1. Multiple fuel options

Although the Automatic temperature control through furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

2. Intelligent control

The Automatic temperature control through furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Automatic temperature control through furnace can significantly reduce energy consumption, thus reducing operating costs.

4. Efficient combustion

The Automatic temperature control through furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Automatic temperature control through furnace

4、Automatic temperature control through furnace function

Automatic temperature control through furnaceit has the functions of hardening and tempering, heat treatment, quench, normalizing and temper，it has the characteristics of energy saving and environmental protection, Easy to control, Stable and reliable, Easy to maintain and Strong adaptability，It is an efficient, energy-saving and environment-friendly metal heating device.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，at the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

Automatic temperature control through furnace

5、Automatic temperature control through furnace structure composition

The Automatic temperature control through furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Radiation chamber

The heat load of the main place for Automatic temperature control through furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. Radiation chamber

The heat load of the main place for Automatic temperature control through furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. furnace chamber

A space for holding metallic materials for heating.

Automatic temperature control through furnace

Automatic temperature control through furnaceMainly used forMetal tempering,Metal melting and casting,Energy conservation and environmental protection,Improve production efficiency andMetal forging heating，the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，Structure consists of recovery of waste heat, convection chamber, combustor, furnace chamber, ventilation system and so on。