Introduction to Automatic temperature controlled chain annealing furnace, introduction to heating furnace function advantages and characteristics

Automatic temperature controlled chain annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，is a common Automatic temperature controlled chain annealing furnace，is a Automatic temperature controlled chain annealing furnace newly developed by One-combustion energy saving。

1、Brief introduction of Automatic temperature controlled chain annealing furnace

Automatic temperature controlled chain annealing furnaceIt is a forging heating device using gas as fuel.，Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it has the functions of hardening and tempering, Casting heating, temper, quench and Forging heating，Widely used in Improve production efficiency, Metal forging heating, Metal heat treatment, Metal tempering and Metal melting and casting，Cheap and high quality。

Automatic temperature controlled chain annealing furnace

2、Structural characteristics of Automatic temperature controlled chain annealing furnace

The Automatic temperature controlled chain annealing furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. furnace chamber

A space for holding metallic materials for heating.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Radiation chamber

The heat load of the main place for Automatic temperature controlled chain annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Automatic temperature controlled chain annealing furnace

3、Automatic temperature controlled chain annealing furnace characteristics

The Automatic temperature controlled chain annealing furnace features are as follows:

1. Easy to maintain

The structural design of the Automatic temperature controlled chain annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

3. Efficient heating

The Automatic temperature controlled chain annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Strong adaptability

The Automatic temperature controlled chain annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Automatic temperature controlled chain annealing furnace

4、Automatic temperature controlled chain annealing furnace function

Automatic temperature controlled chain annealing furnacemultifunctional, with functions such as Forging heating, anneal, quench, heat treatment and Casting heating，the product looks beautiful.，the main features are Easy to control, energy-efficient, energy saving and environmental protection, Easy to maintain and Stable and reliable。

Automatic temperature controlled chain annealing furnace

5、Automatic temperature controlled chain annealing furnace principle

Automatic temperature controlled chain annealing furnacein the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，customizable。

Automatic temperature controlled chain annealing furnace

6、Company preferential activities

Automatic temperature controlled chain annealing furnace is a new type of heating furnace introduced by One-combustion energy saving manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for war industry and other industries. Now consult Automatic temperature controlled chain annealing furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Automatic temperature controlled chain annealing furnaceStructure consists of combustor, convection chamber, ventilation system, ventilation system, furnace chamber and so on，This Automatic temperature controlled chain annealing furnaceThe structural design is more advanced and reasonable.，features include Easy to maintain, energy saving and environmental protection, Easy to control, Strong adaptability and energy-efficient。