Introduction to High temperature circulating trolley forging furnace and forging furnace working principle

High temperature circulating trolley forging furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，multifunctional, with functions such as heat treatment, Forging heating, Casting heating, anneal and heat treatment，Simple structure and reliable operation.，the main structure includes combustor, ventilation system, recovery of waste heat, convection chamber and Radiation chamber，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，the product looks atmospheric.。

1、Brief introduction of High temperature circulating trolley forging furnace

High temperature circulating trolley forging furnaceIt is a forging heating device using gas as fuel.，it has the functions of normalizing, anneal, Casting heating, quench and hardening and tempering，the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，features include Easy to maintain, Easy to control, Easy to control, energy saving and environmental protection and Easy to maintain，was developed and designed by One-combustion energy saving。

High temperature circulating trolley forging furnace

2、High temperature circulating trolley forging furnace function

High temperature circulating trolley forging furnacemultifunctional, with functions such as Forging heating, temper, heat treatment, temper and Forging heating，features include energy-efficient, Strong adaptability, Stable and reliable, Easy to maintain and Stable and reliable，it can be used in aerospace, Machinery manufacturing, shipping, automobile, Machinery manufacturing and other industries，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，the main structure includes ventilation system, recovery of waste heat, combustor, Radiation chamber, ventilation system and so on。

High temperature circulating trolley forging furnace

3、High temperature circulating trolley forging furnace application

High temperature circulating trolley forging furnaces have the following purposes.

1. Improve production efficiency

The High temperature circulating trolley forging furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal heat treatment

In addition to forging heating, High temperature circulating trolley forging furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Improve production efficiency

The High temperature circulating trolley forging furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Energy conservation and environmental protection

The High temperature circulating trolley forging furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal tempering

By properly heating and cooling the metal material, the High temperature circulating trolley forging furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

High temperature circulating trolley forging furnace

4、Structural advantages of High temperature circulating trolley forging furnace

The High temperature circulating trolley forging furnace has the following structure

1. Radiation chamber

The heat load of the main place for High temperature circulating trolley forging furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Radiation chamber

The heat load of the main place for High temperature circulating trolley forging furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. furnace chamber

A space for holding metallic materials for heating.

High temperature circulating trolley forging furnace

5、High temperature circulating trolley forging furnace introduction video

Speak directly with facts on the spot。

High temperature circulating trolley forging furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd it is mainly composed of convection chamber, ventilation system, furnace chamber, recovery of waste heat and Radiation chamber，High temperature circulating trolley forging furnaceThe overall structural design is relatively simple。

6、Company preferential activities

High temperature circulating trolley forging furnace is a new type of forging furnace introduced by Shandong yiran energy-saving environment protection co., ltd manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for war industry and other industries. Now consult One-combustion energy savingProduction and processing的High temperature circulating trolley forging furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

High temperature circulating trolley forging furnaceNatural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，it is widely used in metallurgy, Household necessities, pharmacy, surface treatment, material and other industries。