Introduction to Double pass forging furnace and heating furnace advantages and features

Double pass forging furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，It has a wide range of uses, and is often used inImprove production efficiency,Metal forging heating,Metal melting and casting,Energy conservation and environmental protection,Metal heat treatment and so on，the main features are Stable and reliable, energy saving and environmental protection, Easy to control, Strong adaptability and energy-efficient，in the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，The overall structural design is simple and novel.，it mainly includes combustor, ventilation system, recovery of waste heat, furnace chamber and convection chamber。The following is to introduce the Double pass forging furnace:

1、Brief introduction of Double pass forging furnace

Double pass forging furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a Double pass forging furnace newly developed by One-combustion energy saving。

Double pass forging furnace

2、Double pass forging furnace use

The purpose of Double pass forging furnace is introduced as follows:

1. Metal forging heating

The Double pass forging furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Energy conservation and environmental protection

The Double pass forging furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal heat treatment

In addition to forging heating, Double pass forging furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Double pass forging furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal tempering

By properly heating and cooling the metal material, the Double pass forging furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Double pass forging furnace

3、Double pass forging furnace HD real shot

Speak directly with facts on the spot。

Double pass forging furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the product looks beautiful.。

4、Double pass forging furnace HD real shot

The Double pass forging furnace is designed by One-combustion energy saving with advanced technology, and the product has high performance advantages. In order to facilitate our customers to find a satisfactory heating furnace more quickly, the following high-definition pictures are provided for reference.。

Double pass forging furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Double pass forging furnace characteristics

The Double pass forging furnace features are as follows:

1. Efficient heating

The Double pass forging furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Double pass forging furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Easy to maintain

The structural design of the Double pass forging furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Strong adaptability

The Double pass forging furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Double pass forging furnace

Double pass forging furnaceAdopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，at the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the main structure includes ventilation system, ventilation system, Radiation chamber, combustor, ventilation system and so on。