Introduction to Regenerative tube heating furnace, introduction to heating furnace advantages and characteristics

Regenerative tube heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，in the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，is a kind of Regenerative tube heating furnace manufactured by One-combustion energy saving。

1、Brief introduction of Regenerative tube heating furnace

Regenerative tube heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is based on One-combustion energy saving is carefully developed by One-combustion energy saving combined with advanced technology。

Regenerative tube heating furnace

2、Advantages of Regenerative tube heating furnace principle

Regenerative tube heating furnaceat the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the main features are energy saving and environmental protection, energy-efficient, Stable and reliable, Easy to control and Easy to maintain，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，Widely used in Energy conservation and environmental protection, Metal tempering, Metal heat treatment, Energy conservation and environmental protection and Improve production efficiency，has been favored by more and more customers.。

Regenerative tube heating furnace

3、Functional advantages of Regenerative tube heating furnace

Regenerative tube heating furnaces have the following advantages.

1. Improve product quality

Because the Regenerative tube heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. Wide application range

The Regenerative tube heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

3. Multiple fuel options

Although the Regenerative tube heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. easy to operate

The operation interface of the Regenerative tube heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Intelligent control

The Regenerative tube heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

Regenerative tube heating furnace

4、Structural advantages of Regenerative tube heating furnace

The Regenerative tube heating furnace has the following structure

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. Radiation chamber

The heat load of the main place for Regenerative tube heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Regenerative tube heating furnace

5、Regenerative tube heating furnace introduction video

You can buy Regenerative tube heating furnace according to your needs and show you product videos.。

Regenerative tube heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd it is widely used in building materials, machinery, pharmacy, pharmacy and light industry。

6、One-combustion energy saving delivery site

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Regenerative tube heating furnace production process and production site, and gain favorable comments and recognition from customers.。

Regenerative tube heating furnace

As you can see from the live video.One-combustion energy saving It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

Regenerative tube heating furnacethe product looks atmospheric.，the principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。