Introduction to Trolley type low-temperature annealing furnace, forging furnace specifications, model parameters

Trolley type low-temperature annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a popular Trolley type low-temperature annealing furnace，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，is based on One-combustion energy saving is a kind of Trolley type low-temperature annealing furnace manufactured by One-combustion energy saving。The following is to introduce the Trolley type low-temperature annealing furnace:

1、Brief introduction of Trolley type low-temperature annealing furnace

Trolley type low-temperature annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，Simple structure and reliable operation.，it mainly includes Radiation chamber, ventilation system, ventilation system, Radiation chamber and furnace chamber，Easy to maintain,energy saving and environmental protection,Strong adaptability,energy-efficient,Easy to control，it is an ideal choice for customers to buy Trolley type low-temperature annealing furnace。

Trolley type low-temperature annealing furnace

2、Trolley type low-temperature annealing furnace video detail

On-site aerial photography of Trolley type low-temperature annealing furnace。

Trolley type low-temperature annealing furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd is a kind of high quality and low price Trolley type low-temperature annealing furnace。

3、Trolley type low-temperature annealing furnace use

The purpose of Trolley type low-temperature annealing furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Trolley type low-temperature annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Trolley type low-temperature annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal forging heating

The Trolley type low-temperature annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal heat treatment

In addition to forging heating, Trolley type low-temperature annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Energy conservation and environmental protection

The Trolley type low-temperature annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Trolley type low-temperature annealing furnace

4、Trolley type low-temperature annealing furnace function

Trolley type low-temperature annealing furnacemultifunctional, with functions such as heat treatment, temper, quench, hardening and tempering and heat treatment，the main structure includes ventilation system, recovery of waste heat, ventilation system, combustor and convection chamber，Trolley type low-temperature annealing furnaceSimple structure and advanced technology.，the main features are energy saving and environmental protection, Easy to control, energy-efficient, Easy to maintain and Easy to control，be loved by our customers.。

Trolley type low-temperature annealing furnace

5、Structural advantages of Trolley type low-temperature annealing furnace

The Trolley type low-temperature annealing furnace has the following structure

1. Radiation chamber

The heat load of the main place for Trolley type low-temperature annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

Trolley type low-temperature annealing furnace

6、One-combustion energy saving company service

The stable development of a manufacturer depends not only on product quality, but also on after-sales. Therefore, besides paying attention to product quality and price, the after-sales service of the manufacturer also plays a very important role in the future product application. One-combustion energy saving provides "housekeeping" after-sales service, which is more intimate.。

One-combustion energy saving

Trolley type low-temperature annealing furnaceit has the functions of Forging heating, temper, anneal, Casting heating and normalizing，features include Stable and reliable, Easy to maintain, Stable and reliable, Strong adaptability and energy-efficient，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。