Introduction to High temperature tubular roaster and forging furnace structure principle

High temperature tubular roasterIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it has been widely used in surface treatment, automobile, aerospace, petroleum, Machinery manufacturing and other industries，is a kind of high quality and low price High temperature tubular roaster，the product looks beautiful.，the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.。

1、Brief introduction of High temperature tubular roaster

High temperature tubular roasterIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，at the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，The price is relatively low.。

High temperature tubular roaster

2、High temperature tubular roaster explanation video

The following is the live video of High temperature tubular roaster designed and produced by One-combustion energy saving for users, from which we can see the the advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost. of One-combustion energy savingproduction-manufacturing的High temperature tubular roaster.。

High temperature tubular roaster

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd It can be used for Metal melting and casting, Metal forging heating, Metal heat treatment, Energy conservation and environmental protection, Improve production efficiency, Metal tempering and so on。

3、High temperature tubular roaster application

High temperature tubular roasters have the following purposes.

1. Energy conservation and environmental protection

The High temperature tubular roaster uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The High temperature tubular roaster can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Improve production efficiency

The High temperature tubular roaster has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Energy conservation and environmental protection

The High temperature tubular roaster uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of High temperature tubular roasters can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

High temperature tubular roaster

4、Working principle of High temperature tubular roaster

High temperature tubular roasterat work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，is based on One-combustion energy saving is a kind of High temperature tubular roaster manufactured by One-combustion energy saving。

High temperature tubular roaster

5、How much is the High temperature tubular roaster?

The High temperature tubular roaster price is introduced as follows:

1. Low cost of raw materials

Cost is a direct and fundamental factor that affects the price of High temperature tubular roaster. The manufacturing cost is reflected in the capital investment spent on raw materials, labor and technology, which is high in cost, high in High temperature tubular roaster price, low in cost and low in price.

2. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of High temperature tubular roaster have more or less differences in price.

3. deploy

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of High temperature tubular roaster are closely related. One-combustion energy saving has comprehensively measured the configuration and sales price of products when designing High temperature tubular roaster, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

4. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving High temperature tubular roaster manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the High temperature tubular roaster price can meet the purchasing needs of customers.

5. Company size

Although there are many manufacturers of products in Shandong(Province), there are certain differences in the scale and strength of each manufacturer. Some manufacturers are large in scale and strength, some are small in scale, and some manufacturers do not have their own production workshops and belong to middlemen. Relatively speaking, the prices of products formulated by middlemen are higher.

High temperature tubular roaster

6、Company preferential activities

High temperature tubular roaster is a new type of forging furnace introduced by Shandong yiran energy-saving environment protection co., ltd manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for pharmacy and other industries. Now consult High temperature tubular roaster, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

High temperature tubular roasterthe product looks atmospheric.，is a High temperature tubular roaster。