Introduction to Annealing furnace box type and forging furnace working principle

Annealing furnace box typeIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

1、Brief introduction of Annealing furnace box type

Annealing furnace box typeIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a kind of high quality and low price Annealing furnace box type，it has the characteristics of energy-efficient, Easy to maintain, energy saving and environmental protection, Stable and reliable and energy saving and environmental protection，the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，the principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Annealing furnace box type

2、Annealing furnace box type principle

Annealing furnace box typeat the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the main features are energy-efficient, Easy to control, Easy to maintain, Strong adaptability and Easy to control，is carefully developed by One-combustion energy saving combined with advanced technology。

Annealing furnace box type

3、Annealing furnace box type real shot picture

Take a look at the beautiful pictures of the Annealing furnace box type, showing the product style.。

Annealing furnace box type

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Annealing furnace box type HD real shot

You can buy Annealing furnace box type according to your needs and show you Annealing furnace box type videos.。

Annealing furnace box type

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd it has the functions of normalizing, temper, Casting heating, heat treatment and normalizing。

5、Annealing furnace box type use

The purpose of Annealing furnace box type is introduced as follows:

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Annealing furnace box types can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Improve production efficiency

The Annealing furnace box type has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal tempering

By properly heating and cooling the metal material, the Annealing furnace box type can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal heat treatment

In addition to forging heating, Annealing furnace box types can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Energy conservation and environmental protection

The Annealing furnace box type uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Annealing furnace box type

6、Annealing furnace box type video

The following is the live video of Annealing furnace box type designed and produced by One-combustion energy saving for users, from which we can see the the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency. of Annealing furnace box type.。

Annealing furnace box type

As you can see from the live video.，One-combustion energy saving features include Easy to maintain, energy-efficient, Stable and reliable, energy saving and environmental protection and Strong adaptability。

Annealing furnace box typeusually used in heat treatment, building materials, Household necessities, petroleum, automobile and other fields，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.。