Introduction to Rotary tube furnace, introduction to forging furnace advantages and characteristics

Rotary tube furnaceIt is a forging heating device using gas as fuel.，It is a product series that integrates Metal forging heating, Improve production efficiency, Metal tempering, Energy conservation and environmental protection and Metal forging heating，Commonly used inImprove production efficiency,Metal heat treatment,Metal melting and casting,Metal tempering,Improve production efficiency and so on，the product looks beautiful.，it is mainly composed of furnace chamber, Radiation chamber, ventilation system, ventilation system and convection chamber，productThe overall structural design is relatively simple。

1、Brief introduction of Rotary tube furnace

Rotary tube furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

Rotary tube furnace

2、Rotary tube furnace HD picture real shot

Various specifications and models of Rotary tube furnace are displayed for our customers to visit.。

Rotary tube furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Rotary tube furnace use

The purpose of Rotary tube furnace is introduced as follows:

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Rotary tube furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Improve production efficiency

The Rotary tube furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Energy conservation and environmental protection

The Rotary tube furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Rotary tube furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Improve production efficiency

The Rotary tube furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Rotary tube furnace

4、Rotary tube furnace HD real shot

The following is the live video of Rotary tube furnace designed and produced by One-combustion energy saving for users, from which we can see the It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials. of One-combustion energy savingRotary tube furnace.。

Rotary tube furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd It is a forging heating device using gas as fuel.。

5、Structural characteristics of Rotary tube furnace

The Rotary tube furnace structure is introduced as follows:

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. furnace chamber

A space for holding metallic materials for heating.

4. Radiation chamber

The heat load of the main place for Rotary tube furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Rotary tube furnace

6、How much is the Rotary tube furnace?

The Rotary tube furnace price is introduced as follows:

1. regional advantages

If the location of the manufacturer is superior, its transportation will be more convenient. One-combustion energy saving address:Jinan has convenient transportation, which provides a good convenience for the transportation of Rotary tube furnace.

2. quality

The service life of products with excellent quality will be longer, and at the same time, such products are very high in science and technology, which will create higher benefits for customers and make the price generally high, which is the main reason for the high price.

3. technology content

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

4. product configuration

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Rotary tube furnace has a higher cost performance.

5. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Rotary tube furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Rotary tube furnace price can meet the purchasing needs of customers.

Rotary tube furnace

Rotary tube furnaceis a common Rotary tube furnace，the product looks beautiful.。