What is a Double door multi well heating furnace? Introduction to the advantages, characteristics, and principles of the Forging furnace

Double door multi well heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，is carefully developed by One-combustion energy saving combined with advanced technology。The following is to introduce the Double door multi well heating furnace:

1、Brief introduction of Double door multi well heating furnace

Double door multi well heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，It is mostly used in Metal forging heating, Metal tempering, Metal heat treatment, Energy conservation and environmental protection, Energy conservation and environmental protection, Improve production efficiency and so on，favorable price，be of high quality。

Double door multi well heating furnace

2、Video analysis of Double door multi well heating furnace

The following is the live video of Double door multi well heating furnace designed and produced by One-combustion energy saving for users, from which we can see the The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved. of Double door multi well heating furnace.。

Double door multi well heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd is a kind of high quality and low price Double door multi well heating furnace。

3、Introduction of Double door multi well heating furnace characteristics

Double door multi well heating furnace has the following characteristics

1. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Double door multi well heating furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

2. Stable and reliable

The Double door multi well heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Efficient heating

The Double door multi well heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Easy to maintain

The structural design of the Double door multi well heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Easy to control

The combustion system and ventilation system of the Double door multi well heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Double door multi well heating furnace

4、Double door multi well heating furnace application

Double door multi well heating furnaces have the following purposes.

1. Improve production efficiency

The Double door multi well heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal tempering

By properly heating and cooling the metal material, the Double door multi well heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Double door multi well heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Energy conservation and environmental protection

The Double door multi well heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal heat treatment

In addition to forging heating, Double door multi well heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Double door multi well heating furnace

5、Working principle of Double door multi well heating furnace

Double door multi well heating furnaceat runtime,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，the product looks atmospheric.，it is widely used inpharmacy,building materials,shipping,machinery,heat treatment and other industries，It is a forging heating device using gas as fuel.，be loved by our customers.。

Double door multi well heating furnace

6、Double door multi well heating furnace performance advantage

Double door multi well heating furnaces have the following advantages.

1. easy to operate

The operation interface of the Double door multi well heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Efficient combustion

The Double door multi well heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. easy to operate

The operation interface of the Double door multi well heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

4. Extend the service life of equipment

The Double door multi well heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. Multiple fuel options

Although the Double door multi well heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

Double door multi well heating furnace

Double door multi well heating furnaceIt has a wide range of uses, including Metal forging heating, Metal tempering, Metal heat treatment, Metal melting and casting and Metal tempering，it is widely used in Household necessities, chemical industry, petroleum, Machinery manufacturing, war industry and other industries，Stable and reliable,Easy to control,Strong adaptability,energy-efficient,Stable and reliable。