What is a High temperature tempering industrial furnace? Introduction to the Working Principle of forging furnace

High temperature tempering industrial furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the main features are energy-efficient, Easy to control, Easy to maintain, energy saving and environmental protection and Strong adaptability，is a common High temperature tempering industrial furnace，the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，can be customized according to user's needs.。The following is to introduce the High temperature tempering industrial furnace:

1、Brief introduction of High temperature tempering industrial furnace

High temperature tempering industrial furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it can be used in heat treatment, Household necessities, petroleum, chemical industry, automobile and other industries。

High temperature tempering industrial furnace

2、Introduction of High temperature tempering industrial furnace characteristics

High temperature tempering industrial furnace has the following characteristics

1. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some High temperature tempering industrial furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

2. Easy to control

The combustion system and ventilation system of the High temperature tempering industrial furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. Strong adaptability

The High temperature tempering industrial furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Stable and reliable

The High temperature tempering industrial furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to maintain

The structural design of the High temperature tempering industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

High temperature tempering industrial furnace

3、High temperature tempering industrial furnace function

High temperature tempering industrial furnacemultifunctional, with functions such as anneal, heat treatment, Forging heating, hardening and tempering and normalizing，It is a forging heating device using gas as fuel.，widely used in surface treatment, shipping, automobile, electron, heat treatment and other fields。

High temperature tempering industrial furnace

4、High temperature tempering industrial furnace use

The purpose of High temperature tempering industrial furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the High temperature tempering industrial furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Energy conservation and environmental protection

The High temperature tempering industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal forging heating

The High temperature tempering industrial furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Improve production efficiency

The High temperature tempering industrial furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal heat treatment

In addition to forging heating, High temperature tempering industrial furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

High temperature tempering industrial furnace

5、High temperature tempering industrial furnace advantage

The advantages of High temperature tempering industrial furnace are as follows:

1. Intelligent control

The High temperature tempering industrial furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Improve product quality

Because the High temperature tempering industrial furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Multiple fuel options

Although the High temperature tempering industrial furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Rapid temperature rise

The High temperature tempering industrial furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

High temperature tempering industrial furnace

6、High temperature tempering industrial furnace function

High temperature tempering industrial furnaceit has the functions of quench, temper, normalizing, anneal and Casting heating，at runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，support customization。

High temperature tempering industrial furnace

High temperature tempering industrial furnaceEfficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，the product looks atmospheric.，The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。