What is a Pressure type annealing heat treatment furnace? Introduction to the advantages, characteristics, and principles of the Forging furnace

Pressure type annealing heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Easy to maintain,Easy to control,Strong adaptability,energy saving and environmental protection,Stable and reliable，it has the functions of normalizing, temper, anneal, heat treatment and hardening and tempering，the product looks beautiful.，Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.。The following is to introduce the Pressure type annealing heat treatment furnace:

1、Brief introduction of Pressure type annealing heat treatment furnace

Pressure type annealing heat treatment furnaceIt is a forging heating device using gas as fuel.，at runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it is widely used in petroleum, aerospace, automobile, pharmacy and Machinery manufacturing，is a Pressure type annealing heat treatment furnace，was developed and designed by One-combustion energy saving。

Pressure type annealing heat treatment furnace

2、Pressure type annealing heat treatment furnace characteristics

The Pressure type annealing heat treatment furnace features are as follows:

1. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Pressure type annealing heat treatment furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

2. Easy to maintain

The structural design of the Pressure type annealing heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Stable and reliable

The Pressure type annealing heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to control

The combustion system and ventilation system of the Pressure type annealing heat treatment furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Strong adaptability

The Pressure type annealing heat treatment furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Pressure type annealing heat treatment furnace

3、Pressure type annealing heat treatment furnace structure

The Pressure type annealing heat treatment furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. furnace chamber

A space for holding metallic materials for heating.

Pressure type annealing heat treatment furnace

4、Pressure type annealing heat treatment furnace real shot picture

Exquisite design, advanced technology and complete sizes and models are available for customers to choose at will.。

Pressure type annealing heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Pressure type annealing heat treatment furnace advantage

The advantages of Pressure type annealing heat treatment furnace are as follows:

1. Rapid temperature rise

The Pressure type annealing heat treatment furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Improve product quality

Because the Pressure type annealing heat treatment furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Extend the service life of equipment

The Pressure type annealing heat treatment furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Multiple fuel options

Although the Pressure type annealing heat treatment furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. Uniform heating

The Pressure type annealing heat treatment furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Pressure type annealing heat treatment furnace

6、One-combustion energy saving company service

One-combustion energy saving adheres to the service concept of "being honest, doing things according to rules, pioneering and innovating, mutual benefit and win-win", and serves every customer wholeheartedly to create quality products and intimate services for customers.。

One-combustion energy saving

Pressure type annealing heat treatment furnacethe advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，structure mainly includes: ventilation system, convection chamber, recovery of waste heat, ventilation system, combustor and so on，is a kind of high quality and low price Pressure type annealing heat treatment furnace。