Introduction to Heating gas trolley furnace and forging furnace advantages and features

Heating gas trolley furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，It is a product series that integrates Metal tempering, Metal heat treatment, Metal melting and casting, Energy conservation and environmental protection and Metal tempering，the main structure includes recovery of waste heat, furnace chamber, ventilation system, convection chamber and furnace chamber。The following is to introduce the Heating gas trolley furnace:

1、Brief introduction of Heating gas trolley furnace

Heating gas trolley furnaceIt is a forging heating device using gas as fuel.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.。

Heating gas trolley furnace

2、Structural advantages of Heating gas trolley furnace

The Heating gas trolley furnace has the following structure

1. Radiation chamber

The heat load of the main place for Heating gas trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. Radiation chamber

The heat load of the main place for Heating gas trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. furnace chamber

A space for holding metallic materials for heating.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Heating gas trolley furnace

3、Video analysis of Heating gas trolley furnace

On-site aerial photography of Heating gas trolley furnace。

Heating gas trolley furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

4、Heating gas trolley furnace principle

Heating gas trolley furnaceHeat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，widely used in war industry, heat treatment, metallurgy, automobile, electron and other fields，It can be used for Metal forging heating, Improve production efficiency, Metal heat treatment, Metal melting and casting, Metal tempering, Metal melting and casting and so on。

Heating gas trolley furnace

5、How much is the Heating gas trolley furnace?

The Heating gas trolley furnace price is introduced as follows:

1. Reasonable sales model

There are direct selling manufacturers and agents in the market. Agents are higher than direct selling manufacturers, mainly because agents get goods from manufacturers, sell them to customers and earn the difference from middlemen, so the natural price is higher.

2. market supply and demand

When the market demand for Heating gas trolley furnace is relatively high, manufacturers will raise the price in order to get more profits. On the contrary, when the market demand for this product is low, manufacturers will lower the price in order to sell the remaining products as soon as possible.

3. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Heating gas trolley furnace price and service can meet the actual needs of customers.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. Parameter size

Different product models will also affect the price changes. Different specifications and models will lead to different product prices.

Heating gas trolley furnace

6、One-combustion energy saving delivery site

You can buy Heating gas trolley furnace according to your needs and show you product videos.。

Heating gas trolley furnace

As you can see from the live video.One-combustion energy saving it has the functions of hardening and tempering, quench, temper, Casting heating and Forging heating。

Heating gas trolley furnaceEasy to control,Stable and reliable,energy saving and environmental protection,Strong adaptability,Easy to control，Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，Widely used in Metal melting and casting, Metal heat treatment, Metal forging heating, Improve production efficiency and Energy conservation and environmental protection。