Introduction to Multi station annealing furnace and heating furnace advantages and features

Multi station annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it has the functions of hardening and tempering, Casting heating, normalizing, heat treatment and Casting heating，support customization。

1、Brief introduction of Multi station annealing furnace

Multi station annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，has been favored by more and more customers.。

Multi station annealing furnace

2、Multi station annealing furnace function

Multi station annealing furnacemultifunctional, with functions such as quench, hardening and tempering, anneal, temper and Forging heating，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，at runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Multi station annealing furnace

3、Multi station annealing furnace advantage

The advantages of Multi station annealing furnace are as follows:

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Extend the service life of equipment

The Multi station annealing furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Rapid temperature rise

The Multi station annealing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Improve product quality

Because the Multi station annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Efficient combustion

The Multi station annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Multi station annealing furnace

4、Working principle of Multi station annealing furnace

Multi station annealing furnaceat the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，It is a product series that integrates Improve production efficiency, Metal tempering, Metal heat treatment, Metal forging heating and Improve production efficiency，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is a popular Multi station annealing furnace，Cheap and high quality。

Multi station annealing furnace

5、Multi station annealing furnace real beat

High-definition picture display of Multi station annealing furnace, excellent material selection, reliable quality and trustworthy.。

Multi station annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

Multi station annealing furnaceNatural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，the product looks beautiful.。