What is a Tempering and Annealing Industrial Furnace? Introduction to the principle of heating furnace structure

Tempering and Annealing Industrial FurnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，support customization。

1、Brief introduction of Tempering and Annealing Industrial Furnace

Tempering and Annealing Industrial FurnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it is widely used in light industry, aerospace, pharmacy, metallurgy, war industry and other industries，is a Tempering and Annealing Industrial Furnace。

Tempering and Annealing Industrial Furnace

2、Tempering and Annealing Industrial Furnace principle

Tempering and Annealing Industrial Furnacein the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the main structure includes combustor, convection chamber, ventilation system, furnace chamber, Radiation chamber and so on，This Tempering and Annealing Industrial FurnaceThe structural design is more advanced and reasonable.，the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，is a kind of high quality and low price Tempering and Annealing Industrial Furnace，be loved by our customers.。

Tempering and Annealing Industrial Furnace

3、Introduction of Tempering and Annealing Industrial Furnace characteristics

Tempering and Annealing Industrial Furnace has the following characteristics

1. Stable and reliable

The Tempering and Annealing Industrial Furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Efficient heating

The Tempering and Annealing Industrial Furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Tempering and Annealing Industrial Furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Easy to maintain

The structural design of the Tempering and Annealing Industrial Furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Tempering and Annealing Industrial Furnace

4、Tempering and Annealing Industrial Furnace HD picture real shot

A high-definition picture list of Tempering and Annealing Industrial Furnace is available for our customers to visit. The physical visit can be made to the factory. The address of the visit is Jinan, and the time can be reserved in advance. The manufacturer has a special person to receive it.。

Tempering and Annealing Industrial Furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Tempering and Annealing Industrial Furnace structure

The Tempering and Annealing Industrial Furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Tempering and Annealing Industrial Furnace

6、Tempering and Annealing Industrial Furnace function

Tempering and Annealing Industrial Furnacemultifunctional, with functions such as anneal, temper, hardening and tempering, Forging heating and normalizing，Structure consists of recovery of waste heat, ventilation system, combustor, convection chamber, combustor and so on，productSimple structure and advanced technology.，Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，it is widely used inheat treatment,material,petroleum,shipping,aerospace and other industries，usually used in surface treatment, Household necessities, machinery, light industry, automobile and other fields。

Tempering and Annealing Industrial Furnace

Tempering and Annealing Industrial FurnaceStable and reliable,Easy to maintain,energy saving and environmental protection,Strong adaptability,Easy to control，it has been widely used in pharmacy, electron, Machinery manufacturing, building materials, chemical industry and other industries，the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.。