What is a Preheating heat treatment furnace? heating furnace specifications, models, and parameters

Preheating heat treatment furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，multifunctional, with functions such as Forging heating, normalizing, quench, Forging heating and hardening and tempering，is a popular Preheating heat treatment furnace，Commonly used inMetal tempering,Metal heat treatment,Metal forging heating,Metal melting and casting,Energy conservation and environmental protection and so on，is carefully developed by One-combustion energy saving combined with advanced technology。The following is to introduce the Preheating heat treatment furnace:

1、Brief introduction of Preheating heat treatment furnace

Preheating heat treatment furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it has the functions of temper, heat treatment, Casting heating, anneal and normalizing，the product looks beautiful.，features include Easy to control, Strong adaptability, Stable and reliable, energy saving and environmental protection and energy-efficient，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.。

Preheating heat treatment furnace

2、Preheating heat treatment furnace HD real shot

On-site aerial photography of Preheating heat treatment furnace。

Preheating heat treatment furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.。

3、Introduction of Preheating heat treatment furnace characteristics

Preheating heat treatment furnace has the following characteristics

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Preheating heat treatment furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Easy to control

The combustion system and ventilation system of the Preheating heat treatment furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. Efficient heating

The Preheating heat treatment furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Preheating heat treatment furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. Strong adaptability

The Preheating heat treatment furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Preheating heat treatment furnace

4、Advantages of Preheating heat treatment furnace principle

Preheating heat treatment furnaceat runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

Preheating heat treatment furnace

5、How much is the Preheating heat treatment furnace?

The Preheating heat treatment furnace price is introduced as follows:

1. company strength

There are many manufacturers of products in Jinan, and the strength, technology and after-sales of each manufacturer are different, so the quotation for Preheating heat treatment furnace is naturally different.

2. manufacturing cost

The manufacturer has a fixed raw material supplier, so that the raw material price given by the raw material supplier to the manufacturer will be lower, the raw material cost invested by the manufacturer will be reduced, and the price of the Preheating heat treatment furnace will also be reduced.

3. Parameter size

The same product, even with different specifications and models and different configurations, has different costs, so the price will be different.

4. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Preheating heat treatment furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Preheating heat treatment furnace price can meet the purchasing needs of customers.

5. Configuration difference

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the Preheating heat treatment furnace, which is beyond doubt. One-combustion energy saving makes every product with great care in the attitude of being highly responsible to customers, so the price of One-combustion energy saving Preheating heat treatment furnace is reasonable for products with the same configuration.

Preheating heat treatment furnace

6、company strength

The company has many years of Preheating heat treatment furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Preheating heat treatment furnacein the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，Strong adaptability,Easy to maintain,Easy to control,Stable and reliable,Easy to maintain，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。