Introduction to Rotary heat treatment furnace and heating furnace working principle

Rotary heat treatment furnaceIt is a forging heating device using gas as fuel.，it has the characteristics of Easy to maintain, energy saving and environmental protection, Easy to control, Stable and reliable and energy-efficient。The following is to introduce the Rotary heat treatment furnace:

1、Brief introduction of Rotary heat treatment furnace

Rotary heat treatment furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，it has been widely used in war industry, electron, Household necessities, material, metallurgy and other industries，it is an ideal choice for customers to buy Rotary heat treatment furnace。

Rotary heat treatment furnace

2、Rotary heat treatment furnace characteristics

The Rotary heat treatment furnace features are as follows:

1. Efficient heating

The Rotary heat treatment furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Easy to maintain

The structural design of the Rotary heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Strong adaptability

The Rotary heat treatment furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. Easy to maintain

The structural design of the Rotary heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Stable and reliable

The Rotary heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Rotary heat treatment furnace

3、Rotary heat treatment furnace use

The purpose of Rotary heat treatment furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Rotary heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Energy conservation and environmental protection

The Rotary heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Energy conservation and environmental protection

The Rotary heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal tempering

By properly heating and cooling the metal material, the Rotary heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Rotary heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Rotary heat treatment furnace

4、Rotary heat treatment furnace principle

Rotary heat treatment furnaceHeat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it can be used in surface treatment, metallurgy, chemical industry, building materials, Household necessities and other industries，support customization。

Rotary heat treatment furnace

5、How much is the Rotary heat treatment furnace?

The Rotary heat treatment furnace price is introduced as follows:

1. raw material

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

2. Overall configuration

The difference in Rotary heat treatment furnace configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

3. Self quality

Quality is one of the fundamental and important factors that affect the price. Usually, the better the quality of the Rotary heat treatment furnace, the higher its price, and the quality is mainly affected by the manufacturing process, raw material materials, workers' experience and other factors. Therefore, if customers want to buy products with better quality, they can conduct on-the-spot visits to the product manufacturers to learn more about the scale, manufacturing process and production capacity of the manufacturers, so as to comprehensively judge the quality of the products.

4. Model type

There are many specifications and models of Rotary heat treatment furnace, and different specifications and models must have different production processes. Moreover, the capital spent on the production of large-sized products must be much more than that of small-sized products, so the price of large-sized products is relatively high.

5. market supply and demand

Market supply and demand is the inevitable law of market development, with more market supply, less demand and lower product prices; The market supply is small, and people's demand is large. "Things are scarce and expensive", the product price will increase accordingly, and the price of One-combustion energy saving Rotary heat treatment furnace will also conform to this market law.

Rotary heat treatment furnace

6、company introduction

One-combustion energy saving is a professional manufacturer of heating furnace, which produces Rotary heat treatment furnace with Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials. and reasonable prices. Welcome new and old customers to visit and buy. Click online consultation。

One-combustion energy saving

Rotary heat treatment furnacemultifunctional, with functions such as normalizing, Casting heating, temper, quench and normalizing，the product looks atmospheric.，Simple structure and advanced technology.，it has the structure of ventilation system, recovery of waste heat, convection chamber, recovery of waste heat and furnace chamber。