What is a Fast heating and heat treatment furnace? forging furnace specifications, models, and parameters

Fast heating and heat treatment furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，It is a product series that integrates Metal tempering, Metal forging heating, Energy conservation and environmental protection, Improve production efficiency and Metal heat treatment，the product looks atmospheric.，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，is an advanced Fast heating and heat treatment furnace developed by our company in combination with the actual situation of the industry。

1、Brief introduction of Fast heating and heat treatment furnace

Fast heating and heat treatment furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，has been favored by more and more customers.。

Fast heating and heat treatment furnace

2、Fast heating and heat treatment furnace real beat

Fast heating and heat treatment furnace HD real shot, a variety of specifications and models display, for our customers to choose at will.。

Fast heating and heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Structural characteristics of Fast heating and heat treatment furnace

The Fast heating and heat treatment furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Fast heating and heat treatment furnace

4、Advantages of Fast heating and heat treatment furnace principle

Fast heating and heat treatment furnaceat work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，It has a wide range of uses, including Metal melting and casting, Metal forging heating, Metal heat treatment, Metal tempering and Metal melting and casting，It is an efficient, energy-saving and environment-friendly metal heating device.，is carefully developed by One-combustion energy saving combined with advanced technology。

Fast heating and heat treatment furnace

5、Fast heating and heat treatment furnace use

The purpose of Fast heating and heat treatment furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Fast heating and heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal heat treatment

In addition to forging heating, Fast heating and heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Energy conservation and environmental protection

The Fast heating and heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Improve production efficiency

The Fast heating and heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Fast heating and heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Fast heating and heat treatment furnace

6、Fast heating and heat treatment furnace HD picture

The following picture is a panoramic shot of One-combustion energy saving Fast heating and heat treatment furnace,the product looks beautiful., which is trustworthy.。

Fast heating and heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

Fast heating and heat treatment furnaceMainly used forMetal melting and casting,Metal tempering,Metal heat treatment,Energy conservation and environmental protection andImprove production efficiency，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.。