Introduction to Heat exchange heating furnace and heating furnace advantages and features

Heat exchange heating furnaceIt is a forging heating device using gas as fuel.，multifunctional, with functions such as temper, quench, Casting heating, anneal and heat treatment，is a popular Heat exchange heating furnace，be loved by our customers.。

1、Brief introduction of Heat exchange heating furnace

Heat exchange heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it has the characteristics of Stable and reliable, Easy to control, Easy to maintain, energy-efficient and Strong adaptability，it is an ideal choice for customers to buy Heat exchange heating furnace。

Heat exchange heating furnace

2、Heat exchange heating furnace structure composition

The Heat exchange heating furnace structure is introduced as follows:

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Heat exchange heating furnace

3、Heat exchange heating furnace HD real picture

Heat exchange heating furnace HD factory map, all-round shooting, for our customers to visit.。

Heat exchange heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Heat exchange heating furnace principle

Heat exchange heating furnaceat runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it is usually composed of ventilation system, combustor, combustor, ventilation system and convection chamber，This Heat exchange heating furnaceSimple structure and reliable operation.，is a Heat exchange heating furnace newly developed by One-combustion energy saving。

Heat exchange heating furnace

5、Heat exchange heating furnace use

The purpose of Heat exchange heating furnace is introduced as follows:

1. Energy conservation and environmental protection

The Heat exchange heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The Heat exchange heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Improve production efficiency

The Heat exchange heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal tempering

By properly heating and cooling the metal material, the Heat exchange heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Improve production efficiency

The Heat exchange heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Heat exchange heating furnace

6、One-combustion energy saving workshop picture real shot

The finished products of the Heat exchange heating furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

One-combustion energy saving

The finished products of the Heat exchange heating furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Heat exchange heating furnaceStable and reliable,energy saving and environmental protection,Easy to control,Easy to maintain,energy-efficient，it has the functions of normalizing, hardening and tempering, Forging heating, temper and Casting heating。