Introduction to Annular heating furnace, how much is the price of the forging furnace?

Annular heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，it has the functions of Casting heating, hardening and tempering, anneal, hardening and tempering and heat treatment，Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，the product looks atmospheric.。The following is to introduce the Annular heating furnace:

1、Brief introduction of Annular heating furnace

Annular heating furnaceIt is a forging heating device using gas as fuel.，it can be used in chemical industry, petroleum, pharmacy, building materials, electron and other industries，Widely used in Energy conservation and environmental protection, Metal forging heating, Improve production efficiency, Energy conservation and environmental protection and Metal tempering，it has the structure of convection chamber, ventilation system, furnace chamber, Radiation chamber and recovery of waste heat，is carefully developed by One-combustion energy saving combined with advanced technology。

Annular heating furnace

2、Annular heating furnace field real shot

High-definition pictures for various Annular heating furnace, panoramic display,the product looks beautiful., reliable in quality and trustworthy.。

Annular heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Introduction of Annular heating furnace characteristics

Annular heating furnace has the following characteristics

1. Stable and reliable

The Annular heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Easy to control

The combustion system and ventilation system of the Annular heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Annular heating furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Easy to maintain

The structural design of the Annular heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Efficient heating

The Annular heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

Annular heating furnace

4、Annular heating furnace HD real shot

You can buy Annular heating furnace according to your needs and show you product videos.。

Annular heating furnace

As you can see from the live video.，One-combustion energy saving the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.。

5、Working principle of Annular heating furnace

Annular heating furnaceHeat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，favorable price。

Annular heating furnace

Annular heating furnaceit has been widely used in building materials, machinery, shipping, Household necessities, electron and other industries，is a Annular heating furnace，Commonly used inMetal forging heating,Metal melting and casting,Metal heat treatment,Improve production efficiency,Energy conservation and environmental protection and so on。