Introduction to Environmentally friendly forging furnace, how much is the price of the Forging furnace?

Environmentally friendly forging furnaceIt is a forging heating device using gas as fuel.，at work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the advantage is It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.。The following is to introduce the Environmentally friendly forging furnace:

1、Brief introduction of Environmentally friendly forging furnace

Environmentally friendly forging furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，The overall structural design is simple and novel.，it has the structure of Radiation chamber, convection chamber, combustor, recovery of waste heat and recovery of waste heat，Easy to maintain,energy saving and environmental protection,Strong adaptability,energy-efficient,Easy to control，the product looks atmospheric.，is a common Environmentally friendly forging furnace。

Environmentally friendly forging furnace

2、Working principle of Environmentally friendly forging furnace

Environmentally friendly forging furnacein the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，is a kind of high quality and low price Environmentally friendly forging furnace，The price is low and affordable。

Environmentally friendly forging furnace

3、Physical picture of Environmentally friendly forging furnace

A variety of series of Environmentally friendly forging furnace pictures are displayed, with exquisite design, reliable quality and trustworthiness.。

Environmentally friendly forging furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Environmentally friendly forging furnace performance advantage

The advantages of Environmentally friendly forging furnace are as follows:

1. Extend the service life of equipment

The Environmentally friendly forging furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Reduce operating costs

The efficient combustion and waste heat recovery system of the Environmentally friendly forging furnace can significantly reduce energy consumption, thus reducing operating costs.

3. Uniform heating

The Environmentally friendly forging furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Environmentally friendly forging furnace can significantly reduce energy consumption, thus reducing operating costs.

5. Extend the service life of equipment

The Environmentally friendly forging furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Environmentally friendly forging furnace

5、How much is the Environmentally friendly forging furnace?

The Environmentally friendly forging furnace price is introduced as follows:

1. model

One-combustion energy saving Environmentally friendly forging furnace has various specifications and models, and the prices of different specifications and models are also different. The main difference lies in the different technologies used in the products and the different manufacturing costs. One-combustion energy saving We will regularly offer preferential prices for products of different specifications and models, and will combine the actual purchasing needs of customers to give more benefits, so that complete procurement can get more benefits

2. regional advantages

If the location of the manufacturer is superior, its transportation will be more convenient. One-combustion energy saving detailed address:Zhangqiu Niu Yi Industrial Park, Ji 'nan City, Shandong Province has convenient transportation, which provides a good convenience for the transportation of Environmentally friendly forging furnace.

3. Manufacturer scale

Reliable manufacturers can produce excellent products, and such manufacturers have high comprehensive credibility and can design products in all directions. Therefore, compared with other manufacturers, such products have higher scientific and technological content and more functions. One-combustion energy saving's reputation and products are very high, and it is a trustworthy big brand and manufacturer.

4. raw material

The quality of material selection is one of the main factors that directly affect the Environmentally friendly forging furnace. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Environmentally friendly forging furnace

6、One-combustion energy saving's strength

The company has many years of Environmentally friendly forging furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Environmentally friendly forging furnacethe advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，features include Stable and reliable, Easy to maintain, Stable and reliable, Strong adaptability and Easy to control，Mainly used forMetal tempering,Metal heat treatment,Energy conservation and environmental protection,Improve production efficiency andMetal forging heating。