Brief introduction and advantages of Rail car furnace

Rail car furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the product looks beautiful.，widely used in petroleum, machinery, metallurgy, material, pharmacy and other fields，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

1、Brief introduction of Rail car furnace

Rail car furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it has the functions of Forging heating, heat treatment, anneal, normalizing and hardening and tempering。

Rail car furnace

2、Introduction of Rail car furnace characteristics

Rail car furnace has the following characteristics

1. Stable and reliable

The Rail car furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Easy to control

The combustion system and ventilation system of the Rail car furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. Strong adaptability

The Rail car furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Rail car furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. Easy to maintain

The structural design of the Rail car furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Rail car furnace

3、Rail car furnace function

Rail car furnaceit has the functions of temper, quench, Forging heating, Casting heating and heat treatment，the main features are Easy to control, energy saving and environmental protection, Stable and reliable, Strong adaptability and energy-efficient，the product looks beautiful.，It has a wide range of uses, and is often used inImprove production efficiency,Energy conservation and environmental protection,Metal heat treatment,Metal melting and casting,Improve production efficiency and so on，The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.。

Rail car furnace

4、Rail car furnace HD picture

HD picture of One-combustion energy saving Rail car furnace,Stable and reliable。

Rail car furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Structural characteristics of Rail car furnace

The Rail car furnace has the following structure

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. furnace chamber

A space for holding metallic materials for heating.

Rail car furnace

6、One-combustion energy saving delivery site

Speak directly with facts on the spot。

Rail car furnace

As you can see from the live video.One-combustion energy saving Widely used inMetal forging heating,Metal tempering,Metal tempering,Improve production efficiency,Metal melting and casting and so on。

Rail car furnaceit can be used in light industry, automobile, electron, heat treatment, aerospace and other industries，it has the characteristics of energy-efficient, energy saving and environmental protection, Strong adaptability, energy-efficient and Easy to maintain。