What is a Regenerative burner chain annealing furnace? Introduction to the advantages and characteristics of the forging furnace

Regenerative burner chain annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，at runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，The overall structural design is relatively simple，it has the structure of combustor, convection chamber, furnace chamber, combustor and Radiation chamber。

1、Brief introduction of Regenerative burner chain annealing furnace

Regenerative burner chain annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it is widely used in Machinery manufacturing, automobile, metallurgy, petroleum and building materials，Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，multifunctional, with functions such as Forging heating, anneal, heat treatment, quench and hardening and tempering，It has the functions of Metal forging heating, Metal tempering, Metal tempering, Metal melting and casting and Energy conservation and environmental protection。

Regenerative burner chain annealing furnace

2、Video analysis of Regenerative burner chain annealing furnace

On-site aerial photography of Regenerative burner chain annealing furnace。

Regenerative burner chain annealing furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd it is widely used inHousehold necessities,material,electron,shipping,light industry and other industries。

3、Regenerative burner chain annealing furnace principle

Regenerative burner chain annealing furnaceat the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it has the characteristics of Easy to control, energy saving and environmental protection, energy saving and environmental protection, Strong adaptability and Stable and reliable，the advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，It has a wide range of uses, including Improve production efficiency, Metal heat treatment, Metal forging heating, Energy conservation and environmental protection and Metal forging heating，support customization。

Regenerative burner chain annealing furnace

4、Functional advantages of Regenerative burner chain annealing furnace

Regenerative burner chain annealing furnaces have the following advantages.

1. Efficient combustion

The Regenerative burner chain annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. Multiple fuel options

Although the Regenerative burner chain annealing furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. Extend the service life of equipment

The Regenerative burner chain annealing furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Wide application range

The Regenerative burner chain annealing furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Uniform heating

The Regenerative burner chain annealing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Regenerative burner chain annealing furnace

5、Regenerative burner chain annealing furnace HD real shot

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Regenerative burner chain annealing furnace production process and production site, and gain favorable comments and recognition from customers.。

Regenerative burner chain annealing furnace

As you can see from the live video.，One-combustion energy saving Simple structure and advanced technology.，structure mainly includes: convection chamber, ventilation system, recovery of waste heat, ventilation system, furnace chamber and so on。

6、Regenerative burner chain annealing furnace price concessions

The Regenerative burner chain annealing furnace price is introduced as follows:

1. Manufacturer scale

Direct selling by manufacturers and sales by middlemen will also affect product prices. There are not too many links among direct selling products, so the cost required by manufacturers is low, and the price of Regenerative burner chain annealing furnace is low. Customers can also put products into production in advance. On the contrary, when purchasing products from middlemen, there are not only many links, but also the price of Regenerative burner chain annealing furnace is much higher, so customers should choose products directly sold by manufacturers when purchasing.

2. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Regenerative burner chain annealing furnace have more or less differences in price.

3. Product technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

4. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Regenerative burner chain annealing furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Regenerative burner chain annealing furnace price can meet the purchasing needs of customers.

5. Self quality

The higher the quality of the product, the longer its service life will be, and such products can create more amazing economic value for customers as much as possible. At the same time, customers are quite fond of such products, and One-combustion energy saving's product quality is guaranteed and the price is cost-effective.

Regenerative burner chain annealing furnace

Regenerative burner chain annealing furnacethe product looks beautiful.，is a kind of high quality and low price Regenerative burner chain annealing furnace。