Brief introduction and advantages of Double chamber quenching heat treatment furnace

Double chamber quenching heat treatment furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it has the functions of anneal, normalizing, quench, Forging heating and Casting heating，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.。

1、Brief introduction of Double chamber quenching heat treatment furnace

Double chamber quenching heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is an advanced Double chamber quenching heat treatment furnace developed by our company in combination with the actual situation of the industry。

Double chamber quenching heat treatment furnace

2、Physical picture of Double chamber quenching heat treatment furnace

A variety of series of Double chamber quenching heat treatment furnace pictures are displayed, with exquisite design, reliable quality and trustworthiness.。

Double chamber quenching heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Introduction of Double chamber quenching heat treatment furnace characteristics

Double chamber quenching heat treatment furnace has the following characteristics

1. Strong adaptability

The Double chamber quenching heat treatment furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. Efficient heating

The Double chamber quenching heat treatment furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. Stable and reliable

The Double chamber quenching heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Efficient heating

The Double chamber quenching heat treatment furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. Strong adaptability

The Double chamber quenching heat treatment furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Double chamber quenching heat treatment furnace

4、Double chamber quenching heat treatment furnace function

Double chamber quenching heat treatment furnacemultifunctional, with functions such as temper, hardening and tempering, Forging heating, quench and temper，Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it is an ideal choice for customers to buy Double chamber quenching heat treatment furnace。

Double chamber quenching heat treatment furnace

5、Double chamber quenching heat treatment furnace price advantage

The Double chamber quenching heat treatment furnace price is introduced as follows:

1. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Double chamber quenching heat treatment furnace have more or less differences in price.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. region

One-combustion energy savingJinan, Shandong province, the transportation is convenient, and the corresponding cost of transporting Double chamber quenching heat treatment furnace is low, which reduces the cost of selling Double chamber quenching heat treatment furnace by manufacturers, and the price will also decrease.

4. cost of production

The cost of manufacturing Double chamber quenching heat treatment furnace varies from manufacturer to manufacturer. The higher the cost of manufacturing products, the higher the product price will be. On the other hand, the lower the production cost, the lower the product price, but the quality of products with high production cost is guaranteed, which can reduce the maintenance cost of customers.

5. Manufacturer's strength

Although there are many manufacturers of products in Shandong(Province), there are certain differences in the scale and strength of each manufacturer. Some manufacturers are large in scale and strength, some are small in scale, and some manufacturers do not have their own production workshops and belong to middlemen. Relatively speaking, the prices of products formulated by middlemen are higher.

Double chamber quenching heat treatment furnace

6、One-combustion energy saving workshop pictures

The finished products of the Double chamber quenching heat treatment furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

One-combustion energy saving

The finished products of the Double chamber quenching heat treatment furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Double chamber quenching heat treatment furnaceis a Double chamber quenching heat treatment furnace，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.。