Introduction and advantages of Metal trolley furnace

Metal trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a kind of Metal trolley furnace manufactured by One-combustion energy saving。The following is to introduce the Metal trolley furnace:

1、Brief introduction of Metal trolley furnace

Metal trolley furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，at the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，is a popular Metal trolley furnace，Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，The price is relatively low.，modern technology。

Metal trolley furnace

2、Introduction of advantages of Metal trolley furnace

The advantages of Metal trolley furnace are as follows:

1. Rapid temperature rise

The Metal trolley furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Efficient combustion

The Metal trolley furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Metal trolley furnace can significantly reduce energy consumption, thus reducing operating costs.

4. easy to operate

The operation interface of the Metal trolley furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Uniform heating

The Metal trolley furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Metal trolley furnace

3、Metal trolley furnace function

Metal trolley furnacemultifunctional, with functions such as Casting heating, temper, quench, normalizing and heat treatment。

Metal trolley furnace

4、Metal trolley furnace use

The purpose of Metal trolley furnace is introduced as follows:

1. Metal forging heating

The Metal trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal heat treatment

In addition to forging heating, Metal trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Energy conservation and environmental protection

The Metal trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Metal trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal tempering

By properly heating and cooling the metal material, the Metal trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Metal trolley furnace

5、Metal trolley furnace principle

Metal trolley furnaceat the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the product looks atmospheric.。

Metal trolley furnace

6、High-definition picture display of One-combustion energy saving workshop

The finished products of the Metal trolley furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

One-combustion energy saving

The finished products of the Metal trolley furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Metal trolley furnaceit has been widely used in electron, aerospace, petroleum, building materials, machinery and other industries，in the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，energy saving and environmental protection,energy-efficient,Easy to maintain,Easy to control,energy saving and environmental protection。