Introduction to Low temperature oxidation method for external denitrification and SCR denitration system working principle

Low temperature oxidation method for external denitrificationthat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，features include Economically feasible, High denitration efficiency, Stable operation, Promote sustainable development and Strong adaptability，it has the characteristics of Mature and stable technology, Economically feasible, Environment friendly, Strong adaptability and Environmental protection and pollution-free，it has the functions of environmental protection, Improve working conditions, Promote sustainable development, environmental protection and Improve energy efficiency，it is an ideal choice for customers to buy Low temperature oxidation method for external denitrification。

1、Brief introduction of Low temperature oxidation method for external denitrification

Low temperature oxidation method for external denitrificationdelective catalytic reduction technology is an efficient flue gas denitrification technology.，it has the structure of Flue gas mixing and distribution system, Catalyst reactor, control system, Temperature control and monitoring system and Catalyst supply system，the advantage is Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Low temperature oxidation method for external denitrification can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Low temperature oxidation method for external denitrification technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Low temperature oxidation method for external denitrification technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Low temperature oxidation method for external denitrification technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、Technology has been developed and applied for many years, and it is mature and stable. The Low temperature oxidation method for external denitrification has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Low temperature oxidation method for external denitrification technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.。

Low temperature oxidation method for external denitrification

2、Low temperature oxidation method for external denitrification work site real shot

the product looks atmospheric., advanced technology, complete specifications and models。

Low temperature oxidation method for external denitrification

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Low temperature oxidation method for external denitrification function

Low temperature oxidation method for external denitrificationmultifunctional, with functions such as Improve working conditions, Promote sustainable development, environmental protection, Improve energy efficiency and Improve working conditions，widely used in iron and steel plant, coal-fired power station, cement plant, Gas power plant, building materials and other fields，that is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，can be customized according to user's needs.。

Low temperature oxidation method for external denitrification

4、Low temperature oxidation method for external denitrification performance advantage

Low temperature oxidation method for external denitrifications have the following advantages.

1. Wide applicability

Low temperature oxidation method for external denitrification technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Low temperature oxidation method for external denitrification technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.

2. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the Low temperature oxidation method for external denitrification technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

3. economic viability

The initial investment of this technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Low temperature oxidation method for external denitrification technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Low temperature oxidation method for external denitrification technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.

4. Environmental friendliness

The by-products produced by Low temperature oxidation method for external denitrification technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Low temperature oxidation method for external denitrification technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

5. Diversity and high efficiency of catalysts

There are many kinds of catalysts used in the Low temperature oxidation method for external denitrification technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at low temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Low temperature oxidation method for external denitrification technology to maintain high efficiency of denitration in a wider temperature range and more complex flue gas conditions.

Low temperature oxidation method for external denitrification

5、How much is the Low temperature oxidation method for external denitrification?

The Low temperature oxidation method for external denitrification price is introduced as follows:

1. mass discrepancy

Quality is an important and fundamental factor that affects the price of Low temperature oxidation method for external denitrification. In the final analysis, its price depends on its quality. Usually, Low temperature oxidation method for external denitrification with better quality will cost more, and such products have better effects, longer service life and more advanced technology. A Low temperature oxidation method for external denitrification with a relatively general quality will cost less, have a shorter service life and have a relatively general use effect.

2. Manufacturer scale

The nature of the manufacturer can also greatly affect the price of the Low temperature oxidation method for external denitrification. General manufacturers are divided into direct sellers, agents and middlemen. If they are direct selling manufacturers, there are not too many intermediate links, and their sales prices are low.

3. type of operation

One-combustion energy saving has long used the sales method of small profits but quick turnover to sell products, and the product price, market price and ex-factory price are the same. The purpose of this is to improve the sales volume of products and the visibility of enterprises.

4. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Low temperature oxidation method for external denitrification have more or less differences in price.

5. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Low temperature oxidation method for external denitrification manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Low temperature oxidation method for external denitrification price can meet the purchasing needs of customers.

Low temperature oxidation method for external denitrification

6、Company discount

Low temperature oxidation method for external denitrification is a new type of SCR denitration system introduced by Shandong yiran energy-saving environment protection co., ltd manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for Gas power plant and other industries. Now consult Low temperature oxidation method for external denitrification, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Low temperature oxidation method for external denitrificationit has the functions of Promote sustainable development, Improve working conditions, environmental protection, Improve energy efficiency and Promote sustainable development，at the start of the operation,Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.。