Introduction to Low temperature catalytic reduction denitrification system and SCR denitration system working principle

Low temperature catalytic reduction denitrification systemthe full name is selective catalytic reduction technology, which is an advanced flue gas denitrification technology.，Good selectivity,Economically feasible,Stable operation,Environment friendly,Stable operation。The following is to introduce the Low temperature catalytic reduction denitrification system:

1、Brief introduction of Low temperature catalytic reduction denitrification system

Low temperature catalytic reduction denitrification systemit refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.，Under the action of catalyst, reducing agents (such as ammonia, urea, etc.) react with nitrogen oxides in flue gas to convert them into harmless nitrogen and water vapor.，the product looks beautiful.，Technology has been developed and applied for many years, and it is mature and stable. The Low temperature catalytic reduction denitrification system has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Low temperature catalytic reduction denitrification system technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Low temperature catalytic reduction denitrification system technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Low temperature catalytic reduction denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Low temperature catalytic reduction denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Low temperature catalytic reduction denitrification system technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.，is designed by One-combustion energy saving with advanced technology。

Low temperature catalytic reduction denitrification system

2、Low temperature catalytic reduction denitrification system video

The following is the live video of Low temperature catalytic reduction denitrification system designed and produced by One-combustion energy saving for users, from which we can see the the advantage is Technology has been developed and applied for many years, and it is mature and stable. The Low temperature catalytic reduction denitrification system has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Low temperature catalytic reduction denitrification system technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Low temperature catalytic reduction denitrification system technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Low temperature catalytic reduction denitrification system technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Low temperature catalytic reduction denitrification system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Low temperature catalytic reduction denitrification system technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Low temperature catalytic reduction denitrification system technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy. of Low temperature catalytic reduction denitrification system.。

Low temperature catalytic reduction denitrification system

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the product looks atmospheric.。

3、Low temperature catalytic reduction denitrification system characteristics

The Low temperature catalytic reduction denitrification system features are as follows:

1. Mature technology

After years of development and application, Low temperature catalytic reduction denitrification system technology is very mature and has a wide application prospect.

2. Strong adaptability

Low temperature catalytic reduction denitrification system technology can meet the needs of flue gas denitrification under different working conditions and has a wide range of applications.

3. Stable operation and stability

The technology runs stably and reliably, and is suitable for various scenarios with large changes in flue gas flow, composition and concentration.

4. high efficiency

Gate technology can effectively remove NOx from flue gas, and the denitrification efficiency can usually reach more than 90%.

5. Environmental protection

The final products of Low temperature catalytic reduction denitrification system technology are harmless nitrogen and water vapor, which will not cause secondary pollution to the environment.

Low temperature catalytic reduction denitrification system

4、Working principle of Low temperature catalytic reduction denitrification system

Low temperature catalytic reduction denitrification systemat runtime,Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，the product looks atmospheric.，it mainly includes Catalyst reactor, Temperature control and monitoring system, control system, Flue gas mixing and distribution system and Catalyst supply system，productThe overall structural design is relatively simple and compact.，it has the functions of Promote sustainable development, Improve energy efficiency, environmental protection, Improve energy efficiency and Promote sustainable development，features include Stable operation, Strong adaptability, Less secondary pollution, energy saving and environmental protection and Environmental protection and pollution-free。

Low temperature catalytic reduction denitrification system

5、How much is the Low temperature catalytic reduction denitrification system?

The Low temperature catalytic reduction denitrification system price is introduced as follows:

1. raw material

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

2. Product technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

3. Configuration difference

The difference in Low temperature catalytic reduction denitrification system configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

4. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Low temperature catalytic reduction denitrification system price and service can meet the actual needs of customers.

5. regional difference

One-combustion energy saving detailed address:Zhangqiu Niu Yi Industrial Park, Ji 'nan City, Shandong Province, the transportation here is developed and convenient, and the products can be transported to the designated place in a short time, which saves customers a sum of transportation expenses.

Low temperature catalytic reduction denitrification system

6、One-combustion energy saving's strength

The company has many years of Low temperature catalytic reduction denitrification system manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Low temperature catalytic reduction denitrification systemthe principle is simple.Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，the advantage is Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Low temperature catalytic reduction denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Low temperature catalytic reduction denitrification system technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Low temperature catalytic reduction denitrification system technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Low temperature catalytic reduction denitrification system technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Low temperature catalytic reduction denitrification system technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、Technology has been developed and applied for many years, and it is mature and stable. The Low temperature catalytic reduction denitrification system has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Low temperature catalytic reduction denitrification system technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.，generally, it is composed of Temperature control and monitoring system, Catalyst reactor, control system, Flue gas mixing and distribution system, Catalyst supply system and other major components。