What is a SCR oxidation flue gas denitrification system? Introduction to the advantages and characteristics of the SCR denitration

SCR oxidation flue gas denitrification systemit refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.。

1、Brief introduction of SCR oxidation flue gas denitrification system

SCR oxidation flue gas denitrification systemthat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，the advantage is Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the SCR oxidation flue gas denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the SCR oxidation flue gas denitrification system technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the SCR oxidation flue gas denitrification system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of SCR oxidation flue gas denitrification system technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, SCR oxidation flue gas denitrification system technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、Technology has been developed and applied for many years, and it is mature and stable. The SCR oxidation flue gas denitrification system has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the SCR oxidation flue gas denitrification system technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.，the product looks atmospheric.。

SCR oxidation flue gas denitrification system

2、Functional advantages of SCR oxidation flue gas denitrification system

SCR oxidation flue gas denitrification systems have the following advantages.

1. Intelligent control and convenience of operation

The SCR oxidation flue gas denitrification system has gradually realized intelligent control. By integrating advanced control system and sensor technology, the SCR oxidation flue gas denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.

2. Mature and stable technology

SCR oxidation flue gas denitrification system technology has been developed and applied for many years, and the technology is mature and stable. The SCR oxidation flue gas denitrification system has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the SCR oxidation flue gas denitrification system technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.

3. economic viability

The initial investment of this technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of SCR oxidation flue gas denitrification system technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, SCR oxidation flue gas denitrification system technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.

4. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the SCR oxidation flue gas denitrification system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

5. Intelligent control and convenience of operation

The SCR oxidation flue gas denitrification system has gradually realized intelligent control. By integrating advanced control system and sensor technology, the SCR oxidation flue gas denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.

SCR oxidation flue gas denitrification system

3、SCR oxidation flue gas denitrification system HD real shot

Its appearance design is exquisite and elegant. The following is a high-definition picture of the factory for One-combustion energy saving's customers to choose and buy. You can contact online customer service at any time, make an appointment to visit the factory and take a shuttle bus from One-combustion energy saving.。

SCR oxidation flue gas denitrification system

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、SCR oxidation flue gas denitrification system function

SCR oxidation flue gas denitrification systemit has the functions of environmental protection, Promote sustainable development, Improve energy efficiency, environmental protection and Improve working conditions，customizable。

SCR oxidation flue gas denitrification system

5、Structural advantages of SCR oxidation flue gas denitrification system

The SCR oxidation flue gas denitrification system structure is introduced as follows:

1. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

2. control system

The whole SCR oxidation flue gas denitrification system is automatically controlled to ensure the stable operation of the system and achieve the expected denitration effect.

3. Temperature control and monitoring system

It is used to monitor and control the temperature of the reactor to ensure that the chemical reaction is carried out in the optimal temperature range.

4. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

5. Reactor

It is the core component of SCR oxidation flue gas denitrification system technology, and it is equipped with catalyst to promote the chemical reaction between reductant and NOx.

SCR oxidation flue gas denitrification system

6、How much is the SCR oxidation flue gas denitrification system?

The SCR oxidation flue gas denitrification system price is introduced as follows:

1. market competition

When there are many customers who need this product in the market, and the supply quantity of the manufacturer is limited, there is not so much inventory at all. At this time, the demand will be in short supply, and the price of the SCR oxidation flue gas denitrification system will be very high.

2. company strength

Our company's expected profit value of SCR oxidation flue gas denitrification system is relatively low, and adopts the sales policy of small profits but quick turnover, so the price positioning of SCR oxidation flue gas denitrification system is relatively low.

3. Configuration level

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the SCR oxidation flue gas denitrification system, which is beyond doubt. One-combustion energy saving makes every product with great care in the attitude of being highly responsible to customers, so the price of One-combustion energy saving SCR oxidation flue gas denitrification system is reasonable for products with the same configuration.

4. marketing channel

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

5. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

SCR oxidation flue gas denitrification system

SCR oxidation flue gas denitrification systemin the course of work,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，the product looks beautiful.。