Introduction to Bright Well Annealing Furnace, Forging furnace specifications, model parameters

Bright Well Annealing FurnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，at the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，is a Bright Well Annealing Furnace，Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，is a Bright Well Annealing Furnace newly developed by One-combustion energy saving。The following is to introduce the Bright Well Annealing Furnace:

1、Brief introduction of Bright Well Annealing Furnace

Bright Well Annealing FurnaceIt is a forging heating device using gas as fuel.，the product looks beautiful.，is based on One-combustion energy saving is a kind of Bright Well Annealing Furnace manufactured by One-combustion energy saving。

Bright Well Annealing Furnace

2、Bright Well Annealing Furnace explanation video

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Bright Well Annealing Furnace production process and production site, and gain favorable comments and recognition from customers.。

Bright Well Annealing Furnace

As you can see from the live video.，One-combustion energy saving widely used inpharmacy,shipping,surface treatment,Household necessities,building materials and other industries。

3、Bright Well Annealing Furnace function

Bright Well Annealing Furnacemultifunctional, with functions such as heat treatment, anneal, Casting heating, Casting heating and temper，it is widely used inheat treatment,shipping,surface treatment,light industry,chemical industry and other industries，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，it is widely used in aerospace, material, Machinery manufacturing, pharmacy and machinery，Simple structure and reliable operation.，the main structure includes convection chamber, ventilation system, furnace chamber, ventilation system, recovery of waste heat and so on。

Bright Well Annealing Furnace

4、Bright Well Annealing Furnace application

Bright Well Annealing Furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Bright Well Annealing Furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal heat treatment

In addition to forging heating, Bright Well Annealing Furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Improve production efficiency

The Bright Well Annealing Furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal tempering

By properly heating and cooling the metal material, the Bright Well Annealing Furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Bright Well Annealing Furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Bright Well Annealing Furnace

5、How much is the Bright Well Annealing Furnace?

The Bright Well Annealing Furnace price is introduced as follows:

1. Manufacturer scale

The products manufactured by manufacturers of different scales are also different. Large-scale manufacturers have advanced production technology, the quality of products manufactured is reliable, and large-scale manufacturers have perfect after-sales service, which can provide greater protection for customers and the products manufactured are more cost-effective. Therefore, customers should try to choose large manufacturers to purchase.

2. technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

3. market supply and demand

This is one of the external factors that lead to price fluctuation. Only after fully understanding the market can we make a reasonable decision. One-combustion energy saving has a deep understanding of this factor, so the price of our Bright Well Annealing Furnace is more reasonable.

4. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Bright Well Annealing Furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Bright Well Annealing Furnace price can meet the purchasing needs of customers.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Bright Well Annealing Furnace

6、One-combustion energy saving workshop real shot

On-site aerial photography of Bright Well Annealing Furnace。

Bright Well Annealing Furnace

As you can see from the live video.One-combustion energy saving is a common Bright Well Annealing Furnace。

Bright Well Annealing Furnacethe advantage is Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，It has a wide range of uses, including Metal forging heating, Energy conservation and environmental protection, Metal forging heating, Energy conservation and environmental protection and Metal melting and casting，it mainly includes convection chamber, recovery of waste heat, ventilation system, Radiation chamber and combustor。