Introduction to High temperature bright well furnace, how much is the price of the forging furnace?

High temperature bright well furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the main structure includes combustor, recovery of waste heat, convection chamber, ventilation system, Radiation chamber and so on，productThe overall structural design is relatively simple，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，It has a wide range of uses, including Metal forging heating, Energy conservation and environmental protection, Metal melting and casting, Metal heat treatment and Metal tempering，it is an ideal choice for customers to buy High temperature bright well furnace。

1、Brief introduction of High temperature bright well furnace

High temperature bright well furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，Widely used in Improve production efficiency, Metal forging heating, Improve production efficiency, Metal melting and casting and Metal heat treatment，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，the product looks atmospheric.，at runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。

High temperature bright well furnace

2、Functional advantages of High temperature bright well furnace

High temperature bright well furnaces have the following advantages.

1. Efficient combustion

The High temperature bright well furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. Intelligent control

The High temperature bright well furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Extend the service life of equipment

The High temperature bright well furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Rapid temperature rise

The High temperature bright well furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. easy to operate

The operation interface of the High temperature bright well furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

High temperature bright well furnace

3、High temperature bright well furnace HD picture real shot

Provide high-definition High temperature bright well furnace real shot, a variety of specifications and models for customers to visit.。

High temperature bright well furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、High temperature bright well furnace function

High temperature bright well furnaceit has the functions of temper, Casting heating, normalizing, quench and heat treatment，the principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，It is an efficient, energy-saving and environment-friendly metal heating device.，can be customized according to user's needs.。

High temperature bright well furnace

5、High temperature bright well furnace characteristics

The High temperature bright well furnace features are as follows:

1. Stable and reliable

The High temperature bright well furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Easy to control

The combustion system and ventilation system of the High temperature bright well furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. Efficient heating

The High temperature bright well furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

5. Strong adaptability

The High temperature bright well furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

High temperature bright well furnace

6、High temperature bright well furnace performance advantage

The advantages of High temperature bright well furnace are as follows:

1. Reduce operating costs

The efficient combustion and waste heat recovery system of the High temperature bright well furnace can significantly reduce energy consumption, thus reducing operating costs.

2. Uniform heating

The High temperature bright well furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Multiple fuel options

Although the High temperature bright well furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Rapid temperature rise

The High temperature bright well furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

High temperature bright well furnace

High temperature bright well furnaceThe metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the main structure includes ventilation system, convection chamber, ventilation system, Radiation chamber and recovery of waste heat，This High temperature bright well furnaceThe structural design is simple, novel and special.。