Introduction to Heat treatment well type annealing furnace and Forging furnace advantages and features

Heat treatment well type annealing furnaceIt is a forging heating device using gas as fuel.，is a Heat treatment well type annealing furnace，has been favored by more and more customers.。The following is to introduce the Heat treatment well type annealing furnace:

1、Brief introduction of Heat treatment well type annealing furnace

Heat treatment well type annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it has been widely used in machinery, light industry, war industry, building materials, surface treatment and other industries，the main structure includes Radiation chamber, convection chamber, furnace chamber, furnace chamber, ventilation system and so on，Heat treatment well type annealing furnaceThe structural design is simple, novel and special.，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，it is an ideal choice for customers to buy Heat treatment well type annealing furnace。

Heat treatment well type annealing furnace

2、Heat treatment well type annealing furnace use

The purpose of Heat treatment well type annealing furnace is introduced as follows:

1. Metal forging heating

The Heat treatment well type annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Improve production efficiency

The Heat treatment well type annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal tempering

By properly heating and cooling the metal material, the Heat treatment well type annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Energy conservation and environmental protection

The Heat treatment well type annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Heat treatment well type annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Heat treatment well type annealing furnace

3、Structural characteristics of Heat treatment well type annealing furnace

The Heat treatment well type annealing furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. furnace chamber

A space for holding metallic materials for heating.

4. Radiation chamber

The heat load of the main place for Heat treatment well type annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Heat treatment well type annealing furnace

4、Heat treatment well type annealing furnace video live broadcast

Speak directly with facts on the spot。

Heat treatment well type annealing furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd is a common Heat treatment well type annealing furnace。

5、Heat treatment well type annealing furnace characteristics

The Heat treatment well type annealing furnace features are as follows:

1. Efficient heating

The Heat treatment well type annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Heat treatment well type annealing furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Efficient heating

The Heat treatment well type annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. Stable and reliable

The Heat treatment well type annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Heat treatment well type annealing furnace

6、Heat treatment well type annealing furnace function

Heat treatment well type annealing furnacemultifunctional, with functions such as Casting heating, temper, quench, hardening and tempering and heat treatment，It is an efficient, energy-saving and environment-friendly metal heating device.，reliable quality，The price is relatively low.。

Heat treatment well type annealing furnace

Heat treatment well type annealing furnacethe advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，at the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。