Introduction to Regenerative trolley furnace, how much is the price of the forging furnace?

Regenerative trolley furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，at work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，is a kind of high quality and low price Regenerative trolley furnace，it is an ideal choice for customers to buy Regenerative trolley furnace。The following is to introduce the Regenerative trolley furnace:

1、Brief introduction of Regenerative trolley furnace

Regenerative trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a popular Regenerative trolley furnace。

Regenerative trolley furnace

2、Regenerative trolley furnace function

Regenerative trolley furnacemultifunctional, with functions such as temper, heat treatment, Casting heating, quench and hardening and tempering，Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the main features are energy-efficient, Stable and reliable, energy-efficient, Easy to maintain and Easy to control，is carefully developed by One-combustion energy saving combined with advanced technology。

Regenerative trolley furnace

3、Regenerative trolley furnace use

The purpose of Regenerative trolley furnace is introduced as follows:

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Energy conservation and environmental protection

The Regenerative trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal heat treatment

In addition to forging heating, Regenerative trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal tempering

By properly heating and cooling the metal material, the Regenerative trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal forging heating

The Regenerative trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Regenerative trolley furnace

4、Regenerative trolley furnace function

Regenerative trolley furnacemultifunctional, with functions such as Forging heating, normalizing, quench, Forging heating and Casting heating，is designed by One-combustion energy saving with advanced technology。

Regenerative trolley furnace

5、Regenerative trolley furnace price advantage

The Regenerative trolley furnace price is introduced as follows:

1. Manufacturer scale

The products manufactured by manufacturers of different scales are also different. Large-scale manufacturers have advanced production technology, the quality of products manufactured is reliable, and large-scale manufacturers have perfect after-sales service, which can provide greater protection for customers and the products manufactured are more cost-effective. Therefore, customers should try to choose large manufacturers to purchase.

2. Cost input

Cost is a direct and fundamental factor that affects the price of Regenerative trolley furnace. The manufacturing cost is reflected in the capital investment spent on raw materials, labor and technology, which is high in cost, high in Regenerative trolley furnace price, low in cost and low in price.

3. select a qualified person

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

4. market supply and demand

Market change is the main factor that affects the price level. Because of the instability and uncertainty of the market, the sales price of Regenerative trolley furnace will fluctuate greatly, and the market changes are various.

5. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Regenerative trolley furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Regenerative trolley furnace price can meet the purchasing needs of customers.

Regenerative trolley furnace

6、Company selection skills

Choosing a suitable Regenerative trolley furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Regenerative trolley furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Regenerative trolley furnacein the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，It can be used for Energy conservation and environmental protection, Metal tempering, Metal melting and casting, Metal heat treatment, Metal forging heating, Improve production efficiency and so on，the product looks atmospheric.。