Introduction to Low temperature well type annealing furnace and Forging furnace structure principle

Low temperature well type annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a popular Low temperature well type annealing furnace，is a common Low temperature well type annealing furnace，be loved by our customers.。The following is to introduce the Low temperature well type annealing furnace:

1、Brief introduction of Low temperature well type annealing furnace

Low temperature well type annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Low temperature well type annealing furnace

2、Low temperature well type annealing furnace picture

High-definition pictures of One-combustion energy saving Low temperature well type annealing furnace, showing different specifications and models.。

Low temperature well type annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Introduction of advantages of Low temperature well type annealing furnace

The advantages of Low temperature well type annealing furnace are as follows:

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Uniform heating

The Low temperature well type annealing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. easy to operate

The operation interface of the Low temperature well type annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Low temperature well type annealing furnace can significantly reduce energy consumption, thus reducing operating costs.

5. Uniform heating

The Low temperature well type annealing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Low temperature well type annealing furnace

4、Low temperature well type annealing furnace use

The purpose of Low temperature well type annealing furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Low temperature well type annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal tempering

By properly heating and cooling the metal material, the Low temperature well type annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Improve production efficiency

The Low temperature well type annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal forging heating

The Low temperature well type annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Energy conservation and environmental protection

The Low temperature well type annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Low temperature well type annealing furnace

5、Low temperature well type annealing furnace price concessions

The Low temperature well type annealing furnace price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. cost of production

Production costs include raw material costs, labor costs, other costs, etc., which manufacturers need to invest when producing products, but these factors are not certain. They are affected by the market. When one factor in the market changes, the production costs of manufacturers will also change, and the price of Low temperature well type annealing furnace will also fluctuate to some extent.

3. Product configuration difference

Products of the same style, different configurations, the product price is definitely different, therefore, the Low temperature well type annealing furnace price is affected by the configuration, and the price varies.

4. market demand

This factor is directly related to the economic dynamics. When the economic dynamics are unstable, the relationship between supply and demand will be unbalanced, which will lead to a very large fluctuation in the price of Low temperature well type annealing furnace. Therefore, we should also be aware of the relationship between this factor and the price during the price setting process.

5. regional difference

The price of Low temperature well type annealing furnace in Jinan, Shandong province is much lower than that in other regions, and One-combustion energy saving is a Low temperature well type annealing furnace direct selling factory not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Low temperature well type annealing furnace price positioning more reasonable, low-cost and economical.

Low temperature well type annealing furnace

6、Why choose One-combustion energy saving?

Choosing a suitable Low temperature well type annealing furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Low temperature well type annealing furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Low temperature well type annealing furnaceit has been widely used in pharmacy, petroleum, war industry, pharmacy, heat treatment and other industries，multifunctional, with functions such as temper, Casting heating, normalizing, heat treatment and hardening and tempering，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.。