Introduction to Pit type spheroidization annealing furnace, introduction to forging furnace advantages and characteristics

Pit type spheroidization annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，It has a wide range of uses, including Energy conservation and environmental protection, Energy conservation and environmental protection, Metal heat treatment, Metal melting and casting and Metal forging heating，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，it has the characteristics of energy-efficient, Easy to control, Easy to maintain, energy saving and environmental protection and Strong adaptability，at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。The following is to introduce the Pit type spheroidization annealing furnace:

1、Brief introduction of Pit type spheroidization annealing furnace

Pit type spheroidization annealing furnaceIt is a forging heating device using gas as fuel.，it has the functions of normalizing, heat treatment, Casting heating, Forging heating and hardening and tempering，the main structure includes ventilation system, recovery of waste heat, convection chamber, combustor and ventilation system，is a kind of high quality and low price Pit type spheroidization annealing furnace，was developed and designed by One-combustion energy saving。

Pit type spheroidization annealing furnace

2、Pit type spheroidization annealing furnace characteristics

The Pit type spheroidization annealing furnace features are as follows:

1. Strong adaptability

The Pit type spheroidization annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. Easy to maintain

The structural design of the Pit type spheroidization annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Easy to control

The combustion system and ventilation system of the Pit type spheroidization annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Stable and reliable

The Pit type spheroidization annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Efficient heating

The Pit type spheroidization annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

Pit type spheroidization annealing furnace

3、Pit type spheroidization annealing furnace function

Pit type spheroidization annealing furnacemultifunctional, with functions such as temper, temper, quench, Casting heating and Forging heating，in the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，the advantage is It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，It is an efficient, energy-saving and environment-friendly metal heating device.，support customization。

Pit type spheroidization annealing furnace

4、Pit type spheroidization annealing furnace principle

Pit type spheroidization annealing furnaceat work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it is an ideal choice for customers to buy Pit type spheroidization annealing furnace。

Pit type spheroidization annealing furnace

5、Pit type spheroidization annealing furnace application

Pit type spheroidization annealing furnaces have the following purposes.

1. Metal forging heating

The Pit type spheroidization annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Pit type spheroidization annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal tempering

By properly heating and cooling the metal material, the Pit type spheroidization annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal heat treatment

In addition to forging heating, Pit type spheroidization annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Improve production efficiency

The Pit type spheroidization annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Pit type spheroidization annealing furnace

6、One-combustion energy saving delivery site

You can buy Pit type spheroidization annealing furnace according to your needs and show you product videos.。

Pit type spheroidization annealing furnace

As you can see from the live video.One-combustion energy saving generally, it is composed of recovery of waste heat, furnace chamber, ventilation system, combustor, convection chamber and other major components。

Pit type spheroidization annealing furnacethe main features are Stable and reliable, Easy to control, Easy to maintain, Strong adaptability and energy-efficient，the product looks beautiful.，widely used inbuilding materials,machinery,shipping,chemical industry,surface treatment and other industries。