What is a Pit type industrial annealing furnace? Introduction to the advantages, characteristics, and principles of the Forging furnace

Pit type industrial annealing furnaceIt is a forging heating device using gas as fuel.，usually used in machinery, automobile, material, Machinery manufacturing, automobile and other fields，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.。The following is to introduce the Pit type industrial annealing furnace:

1、Brief introduction of Pit type industrial annealing furnace

Pit type industrial annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Pit type industrial annealing furnace

2、Introduction of Pit type industrial annealing furnace characteristics

Pit type industrial annealing furnace has the following characteristics

1. Efficient heating

The Pit type industrial annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Strong adaptability

The Pit type industrial annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Stable and reliable

The Pit type industrial annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to maintain

The structural design of the Pit type industrial annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Pit type industrial annealing furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

Pit type industrial annealing furnace

3、Advantages of Pit type industrial annealing furnace principle

Pit type industrial annealing furnaceat runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it has the functions of Forging heating, Casting heating, Forging heating, temper and Casting heating，the main structure includes furnace chamber, recovery of waste heat, ventilation system, Radiation chamber and convection chamber，modern technology。

Pit type industrial annealing furnace

4、Introduction of Pit type industrial annealing furnace characteristics

Pit type industrial annealing furnace has the following characteristics

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Strong adaptability

The Pit type industrial annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Stable and reliable

The Pit type industrial annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to control

The combustion system and ventilation system of the Pit type industrial annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Easy to maintain

The structural design of the Pit type industrial annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Pit type industrial annealing furnace

5、Pit type industrial annealing furnace function

Pit type industrial annealing furnacemultifunctional, with functions such as heat treatment, normalizing, anneal, quench and hardening and tempering，Stable and reliable,Easy to control,Stable and reliable,energy saving and environmental protection,energy-efficient。

Pit type industrial annealing furnace

6、Pit type industrial annealing furnace quotation

The Pit type industrial annealing furnace price is introduced as follows:

1. region

Different provinces and regions have different consumption levels, different market positioning and different prices.

2. Manufacturer's strength

One-combustion energy saving is a self-produced and self-sold Pit type industrial annealing furnace, and has rich experience in the production and manufacturing of Pit type industrial annealing furnace. In the process of production and manufacturing, there is less waste of resources, and the corresponding product prices are also low.

3. deploy

Usually, the quotation of Pit type industrial annealing furnace changes with its configuration, but the quotation is different according to the different needs of customers and different product configurations.

4. select a qualified person

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

5. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Pit type industrial annealing furnace price and service can meet the actual needs of customers.

Pit type industrial annealing furnace

Pit type industrial annealing furnaceIt is a product series that integrates Energy conservation and environmental protection, Metal forging heating, Metal melting and casting, Metal heat treatment and Improve production efficiency，is a popular Pit type industrial annealing furnace，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.。