What is a Pit type tempering furnace? Introduction to the Working Principle of Forging furnace

Pit type tempering furnaceIt is a forging heating device using gas as fuel.，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，the product looks beautiful.，The price is relatively low.。The following is to introduce the Pit type tempering furnace:

1、Brief introduction of Pit type tempering furnace

Pit type tempering furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the product looks beautiful.，It has a wide range of uses, including Metal forging heating, Metal forging heating, Energy conservation and environmental protection, Metal melting and casting and Metal heat treatment，usually used in surface treatment, electron, chemical industry, Household necessities, petroleum and other fields，The structural design is simple, novel and special.，it is usually composed of combustor, recovery of waste heat, ventilation system, Radiation chamber and convection chamber。

Pit type tempering furnace

2、Pit type tempering furnace structure composition

The Pit type tempering furnace structure is introduced as follows:

1. Radiation chamber

The heat load of the main place for Pit type tempering furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. furnace chamber

A space for holding metallic materials for heating.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Pit type tempering furnace

3、Pit type tempering furnace HD real shot

You can buy Pit type tempering furnace according to your needs and show you Pit type tempering furnace videos.。

Pit type tempering furnace

As you can see from the live video.，One-combustion energy saving at runtime,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。

4、Introduction of Pit type tempering furnace characteristics

Pit type tempering furnace has the following characteristics

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Stable and reliable

The Pit type tempering furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Strong adaptability

The Pit type tempering furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. Efficient heating

The Pit type tempering furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. Easy to maintain

The structural design of the Pit type tempering furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Pit type tempering furnace

5、How much is the Pit type tempering furnace?

The Pit type tempering furnace price is introduced as follows:

1. quality

Generally speaking, the higher the product quality, the higher the Pit type tempering furnace price. A reasonable balance is made between quality and price, so that the comprehensive quality of the product can meet the customer's use standards and meet the basic needs of customers in terms of price.

2. Model type

The prices of products with different specifications and models will definitely be different. Generally speaking, the larger the specifications and models, the higher the prices will be. Because the raw materials and time consumed in the manufacturing process of large-sized products are more, the prices are much higher than those of small-sized products.

3. technology content

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

4. company strength

Our factory has mature and perfect production technology, advanced and intelligent processing technology, abundant labor resources and low investment. Coupled with the influence of special geographical location, our company has invested much less in manpower, material resources and financial resources than other manufacturers.

5. Configuration level

The difference in Pit type tempering furnace configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

Pit type tempering furnace

6、Company preferential activities

Pit type tempering furnace is a new type of Forging furnace introduced by Shandong yiran energy-saving environment protection co., ltd manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for heat treatment and other industries. Now consult Pit type tempering furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Pit type tempering furnaceStable and reliable,energy saving and environmental protection,Easy to maintain,Stable and reliable,Easy to control，It can be used for Metal tempering, Improve production efficiency, Metal forging heating, Improve production efficiency, Metal melting and casting, Metal heat treatment and so on，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.。