Introduction to Deep well smelting furnace, introduction to Forging furnace function advantages and characteristics

Deep well smelting furnaceIt is a forging heating device using gas as fuel.。

1、Brief introduction of Deep well smelting furnace

Deep well smelting furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Structure consists of Radiation chamber, recovery of waste heat, ventilation system, combustor, ventilation system and so on，Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，multifunctional, with functions such as quench, temper, Casting heating, normalizing and heat treatment，it is an ideal choice for customers to buy Deep well smelting furnace。

Deep well smelting furnace

2、On-site real shot of Deep well smelting furnace

Deep well smelting furnace specifications and models are complete, and customers can choose at will. High-definition pictures are available for customers' reference. Customers are welcome to visit our factory.。

Deep well smelting furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Introduction of Deep well smelting furnace characteristics

Deep well smelting furnace has the following characteristics

1. Easy to maintain

The structural design of the Deep well smelting furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Deep well smelting furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Easy to maintain

The structural design of the Deep well smelting furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Efficient heating

The Deep well smelting furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Deep well smelting furnace

4、Deep well smelting furnace application

Deep well smelting furnaces have the following purposes.

1. Metal tempering

By properly heating and cooling the metal material, the Deep well smelting furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal heat treatment

In addition to forging heating, Deep well smelting furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Improve production efficiency

The Deep well smelting furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal heat treatment

In addition to forging heating, Deep well smelting furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Energy conservation and environmental protection

The Deep well smelting furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Deep well smelting furnace

5、Video analysis of Deep well smelting furnace

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Deep well smelting furnacet operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Deep well smelting furnace

As you can see from the live video.，One-combustion energy saving it has the functions of Forging heating, hardening and tempering, heat treatment, Casting heating and Forging heating。

6、Brief introduction of Deep well smelting furnace

Deep well smelting furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is designed by One-combustion energy saving with advanced technology。

Deep well smelting furnace

Deep well smelting furnaceMainly used forMetal melting and casting,Improve production efficiency,Energy conservation and environmental protection,Metal tempering andMetal heat treatment，the product looks atmospheric.。