Introduction to Deep well heat treatment annealing furnace, advantages, characteristics and principles of heating furnace

Deep well heat treatment annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a Deep well heat treatment annealing furnace，is a kind of Deep well heat treatment annealing furnace manufactured by One-combustion energy saving。The following is to introduce the Deep well heat treatment annealing furnace:

1、Brief introduction of Deep well heat treatment annealing furnace

Deep well heat treatment annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the product looks atmospheric.，at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，be loved by our customers.。

Deep well heat treatment annealing furnace

2、Deep well heat treatment annealing furnace application

Deep well heat treatment annealing furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Deep well heat treatment annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Improve production efficiency

The Deep well heat treatment annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal forging heating

The Deep well heat treatment annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Deep well heat treatment annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal tempering

By properly heating and cooling the metal material, the Deep well heat treatment annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Deep well heat treatment annealing furnace

3、Structural advantages of Deep well heat treatment annealing furnace

The Deep well heat treatment annealing furnace has the following structure

1. Radiation chamber

The heat load of the main place for Deep well heat treatment annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Deep well heat treatment annealing furnace

4、Functional advantages of Deep well heat treatment annealing furnace

Deep well heat treatment annealing furnaces have the following advantages.

1. easy to operate

The operation interface of the Deep well heat treatment annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Extend the service life of equipment

The Deep well heat treatment annealing furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Intelligent control

The Deep well heat treatment annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Rapid temperature rise

The Deep well heat treatment annealing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Deep well heat treatment annealing furnace

5、Introduction of Deep well heat treatment annealing furnace characteristics

Deep well heat treatment annealing furnace has the following characteristics

1. Easy to maintain

The structural design of the Deep well heat treatment annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Strong adaptability

The Deep well heat treatment annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Easy to control

The combustion system and ventilation system of the Deep well heat treatment annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Stable and reliable

The Deep well heat treatment annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Deep well heat treatment annealing furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Deep well heat treatment annealing furnace

6、Deep well heat treatment annealing furnace characteristics

The Deep well heat treatment annealing furnace features are as follows:

1. Efficient heating

The Deep well heat treatment annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Easy to maintain

The structural design of the Deep well heat treatment annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Stable and reliable

The Deep well heat treatment annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Strong adaptability

The Deep well heat treatment annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Deep well heat treatment annealing furnace

Deep well heat treatment annealing furnaceThe structural design is simple, novel and special.，it mainly includes furnace chamber, combustor, convection chamber, ventilation system and Radiation chamber，the product looks atmospheric.，multifunctional, with functions such as quench, Forging heating, normalizing, hardening and tempering and anneal。