Introduction to Deep well mold heating furnace, forging furnace advantages, characteristics and principles

Deep well mold heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。

1、Brief introduction of Deep well mold heating furnace

Deep well mold heating furnaceIt is a forging heating device using gas as fuel.，at work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，features include Strong adaptability, Easy to maintain, energy-efficient, Strong adaptability and Stable and reliable。

Deep well mold heating furnace

2、Deep well mold heating furnace advantage

The advantages of Deep well mold heating furnace are as follows:

1. Reduce operating costs

The efficient combustion and waste heat recovery system of the Deep well mold heating furnace can significantly reduce energy consumption, thus reducing operating costs.

2. Extend the service life of equipment

The Deep well mold heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Intelligent control

The Deep well mold heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Extend the service life of equipment

The Deep well mold heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Deep well mold heating furnace

3、Deep well mold heating furnace principle

Deep well mold heating furnaceat runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。

Deep well mold heating furnace

4、Structural characteristics of Deep well mold heating furnace

The Deep well mold heating furnace structure is introduced as follows:

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. furnace chamber

A space for holding metallic materials for heating.

4. Radiation chamber

The heat load of the main place for Deep well mold heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Deep well mold heating furnace

5、Deep well mold heating furnace use

The purpose of Deep well mold heating furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Deep well mold heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal tempering

By properly heating and cooling the metal material, the Deep well mold heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal forging heating

The Deep well mold heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal heat treatment

In addition to forging heating, Deep well mold heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal forging heating

The Deep well mold heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Deep well mold heating furnace

6、Brief introduction of Deep well mold heating furnace

Deep well mold heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the product looks beautiful.，modern technology，low in price。

Deep well mold heating furnace

Deep well mold heating furnacethe product looks atmospheric.，it has the characteristics of Easy to control, energy saving and environmental protection, energy saving and environmental protection, Easy to control and Strong adaptability。