What is a Double chamber quenching industrial furnace? Forging furnace specifications, models, and parameters

Double chamber quenching industrial furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，it is usually composed of ventilation system, combustor, ventilation system, recovery of waste heat and Radiation chamber。The following is to introduce the Double chamber quenching industrial furnace:

1、Brief introduction of Double chamber quenching industrial furnace

Double chamber quenching industrial furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the product looks atmospheric.。

Double chamber quenching industrial furnace

2、Double chamber quenching industrial furnace function

Double chamber quenching industrial furnaceit has the functions of quench, temper, anneal, normalizing and heat treatment，the product looks atmospheric.，at work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，can be customized according to user's needs.。

Double chamber quenching industrial furnace

3、Structural characteristics of Double chamber quenching industrial furnace

The Double chamber quenching industrial furnace structure is introduced as follows:

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. Radiation chamber

The heat load of the main place for Double chamber quenching industrial furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. furnace chamber

A space for holding metallic materials for heating.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Double chamber quenching industrial furnace

4、Double chamber quenching industrial furnace use

The purpose of Double chamber quenching industrial furnace is introduced as follows:

1. Energy conservation and environmental protection

The Double chamber quenching industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The Double chamber quenching industrial furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Energy conservation and environmental protection

The Double chamber quenching industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Double chamber quenching industrial furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal heat treatment

In addition to forging heating, Double chamber quenching industrial furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Double chamber quenching industrial furnace

5、Introduction of Double chamber quenching industrial furnace characteristics

Double chamber quenching industrial furnace has the following characteristics

1. Stable and reliable

The Double chamber quenching industrial furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Strong adaptability

The Double chamber quenching industrial furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Efficient heating

The Double chamber quenching industrial furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Easy to maintain

The structural design of the Double chamber quenching industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Double chamber quenching industrial furnace

6、One-combustion energy saving company service

Perfect service: In order to improve the service quality and improve the service level, One-combustion energy saving has set up a sound quality management department and a professional after-sales service team, so as to be highly responsible for customers and avoid their worries in the use process.。

One-combustion energy saving

Double chamber quenching industrial furnacemultifunctional, with functions such as hardening and tempering, Forging heating, Casting heating, quench and Forging heating，It is an efficient, energy-saving and environment-friendly metal heating device.，It has a wide range of uses, including Metal melting and casting, Energy conservation and environmental protection, Improve production efficiency, Metal heat treatment and Metal heat treatment。